Articles | Volume 1, issue 1
https://doi.org/10.5194/se-1-85-2010
© Author(s) 2010. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
https://doi.org/10.5194/se-1-85-2010
© Author(s) 2010. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
Method article
| 
28 Sep 2010
Method article |
| 28 Sep 2010
A simple method for solving the Bussian equation for electrical conduction in rocks
P. W. J. Glover
Département de Géologie et de Génie Géologique, Université Laval, Québec, Canada
T. J. Ransford
Département de Mathématiques et de Statistique, Université Laval, Québec, Canada
G. Auger
Département de Géologie et de Génie Géologique, Université Laval, Québec, Canada
Related subject area
Mineral and rock physics
Using internal standards in time-resolved X-ray micro-computed tomography to quantify grain-scale developments in solid-state mineral reactions
Investigating rough single-fracture permeabilities with persistent homology
Quartz under stress: Raman calibration and applications of metamorphic inclusions to geobarometry
Development of multi-field rock resistivity test system for THMC
Raman spectroscopy in thrust-stacked carbonates: an investigation of spectral parameters with implications for temperature calculations in strained samples
Reconstructing post-Jurassic overburden in central Europe: new insights from mudstone compaction and thermal history analyses of the Franconian Alb, SE Germany
Failure mode transition in Opalinus Clay: a hydro-mechanical and microstructural perspective
Thermal equation of state of the main minerals of eclogite: Constraining the density evolution of eclogite during the delamination process in Tibet
Creep of CarbFix basalt: influence of rock–fluid interaction
Micromechanisms leading to shear failure of Opalinus Clay in a triaxial test: a high-resolution BIB–SEM study
Elastic anisotropies of rocks in a subduction and exhumation setting
Mechanical and hydraulic properties of the excavation damaged zone (EDZ) in the Opalinus Clay of the Mont Terri rock laboratory, Switzerland
The competition between fracture nucleation, propagation, and coalescence in dry and water-saturated crystalline rock
Effect of normal stress on the frictional behavior of brucite: application to slow earthquakes at the subduction plate interface in the mantle wedge
Measuring hydraulic fracture apertures: a comparison of methods
Extracting microphysical fault friction parameters from laboratory and field injection experiments
The physics of fault friction: insights from experiments on simulated gouges at low shearing velocities
Hydromechanical processes and their influence on the stimulation effected volume: observations from a decameter-scale hydraulic stimulation project
Bilinear pressure diffusion and termination of bilinear flow in a vertically fractured well injecting at constant pressure
Frictional slip weakening and shear-enhanced crystallinity in simulated coal fault gouges at slow slip rates
The hydraulic efficiency of single fractures: correcting the cubic law parameterization for self-affine surface roughness and fracture closure
Magnetic properties of pseudotachylytes from western Jämtland, central Swedish Caledonides
The variation and visualisation of elastic anisotropy in rock-forming minerals
A multi-phasic approach for estimating the Biot coefficient for Grimsel granite
Deformation mechanisms in mafic amphibolites and granulites: record from the Semail metamorphic sole during subduction infancy
Stress characterization and temporal evolution of borehole failure at the Rittershoffen geothermal project
Uniaxial compression of calcite single crystals at room temperature: insights into twinning activation and development
Geomechanical modelling of sinkhole development using distinct elements: model verification for a single void space and application to the Dead Sea area
Enhanced pore space analysis by use of μ-CT, MIP, NMR, and SIP
A new theoretical interpretation of Archie's saturation exponent
Microscale and nanoscale strain mapping techniques applied to creep of rocks
Deformation in cemented mudrock (Callovo–Oxfordian Clay) by microcracking, granular flow and phyllosilicate plasticity: insights from triaxial deformation, broad ion beam polishing and scanning electron microscopy
Archie's law – a reappraisal
Simulating stress-dependent fluid flow in a fractured core sample using real-time X-ray CT data
Strength and permeability recovery of tuffisite-bearing andesite
Roberto Emanuele Rizzo, Damien Freitas, James Gilgannon, Sohan Seth, Ian B. Butler, Gina Elizabeth McGill, and Florian Fusseis
Solid Earth, 15, 493–512, https://doi.org/10.5194/se-15-493-2024, https://doi.org/10.5194/se-15-493-2024, 2024
Short summary
Short summary
Here we introduce a new approach for analysing time-resolved 3D X-ray images tracking mineral changes in rocks. Using deep learning, we accurately identify and quantify the evolution of mineral components during reactions. The method demonstrates high precision in quantifying a metamorphic reaction, enabling accurate calculation of mineral growth rates and porosity changes. This showcases artificial intelligence's potential to enhance our understanding of Earth science processes.
Marco Fuchs, Anna Suzuki, Togo Hasumi, and Philipp Blum
Solid Earth, 15, 353–365, https://doi.org/10.5194/se-15-353-2024, https://doi.org/10.5194/se-15-353-2024, 2024
Short summary
Short summary
In this study, the permeability of a natural fracture in sandstone is estimated based only on its geometry. For this purpose, the topological method of persistent homology is applied to three geometric data sets with different resolutions for the first time. The results of all data sets compare well with conventional experimental and numerical methods. Since the analysis takes less time to the same amount of time, it seems to be a good alternative to conventional methods.
Bruno Reynard and Xin Zhong
Solid Earth, 14, 591–602, https://doi.org/10.5194/se-14-591-2023, https://doi.org/10.5194/se-14-591-2023, 2023
Short summary
Short summary
Rocks are brought to great depths and back to the Earth's surface by the tectonic processes that shape mountain ranges. Tiny mineral inclusions can record how deep rocks went. Quartz, a common mineral inclusion, was put in the laboratory at conditions that mimic those encountered at depths to about 100 km. A laser-based spectroscopy (Raman) was calibrated to read pressure from quartz inclusions in rocks and to unravel their deep travel.
Jianwei Ren, Lei Song, Qirui Wang, Haipeng Li, Junqi Fan, Jianhua Yue, and Honglei Shen
Solid Earth, 14, 261–270, https://doi.org/10.5194/se-14-261-2023, https://doi.org/10.5194/se-14-261-2023, 2023
Short summary
Short summary
A THMC multi-field rock resistivity test system is developed, which has the functions of rock triaxial and resistivity testing under the conditions of high and low temperature, high pressure, and high salinity water seepage. A sealing method to prevent the formation of a water film on the side of the specimen is proposed based on the characteristics of the device. The device is suitable for studying the relationship between rock mechanical properties and resistivity in complex environments.
Lauren Kedar, Clare E. Bond, and David K. Muirhead
Solid Earth, 13, 1495–1511, https://doi.org/10.5194/se-13-1495-2022, https://doi.org/10.5194/se-13-1495-2022, 2022
Short summary
Short summary
Raman spectroscopy of carbon-bearing rocks is often used to calculate peak temperatures and therefore burial history. However, strain is known to affect Raman spectral parameters. We investigate a series of deformed rocks that have been subjected to varying degrees of strain and find that there is a consistent change in some parameters in the most strained rocks, while other parameters are not affected by strain. We apply temperature calculations and find that strain affects them differently.
Simon Freitag, Michael Drews, Wolfgang Bauer, Florian Duschl, David Misch, and Harald Stollhofen
Solid Earth, 13, 1003–1026, https://doi.org/10.5194/se-13-1003-2022, https://doi.org/10.5194/se-13-1003-2022, 2022
Short summary
Short summary
The carbonates of the Malm are the main reservoir rocks for hydrothermal heat and power generation in southern Germany. To better understand these buried rocks, the carbonates exposed in northern Bavaria are often investigated. As the petrophysical properties of carbonates strongly depend on their subsidence history and maximum burial depth, we will investigate this issue by analyzing mudstones, which indirectly store this type of information and are found just below the Malm carbonates.
Lisa Winhausen, Kavan Khaledi, Mohammadreza Jalali, Janos L. Urai, and Florian Amann
Solid Earth, 13, 901–915, https://doi.org/10.5194/se-13-901-2022, https://doi.org/10.5194/se-13-901-2022, 2022
Short summary
Short summary
Triaxial compression tests at different effective stresses allow for analysing the deformation behaviour of Opalinus Clay, the potential host rock for nuclear waste in Switzerland. We conducted microstructural investigations of the deformed samples to relate the bulk hydro-mechanical behaviour to the processes on the microscale. Results show a transition from brittle- to more ductile-dominated deformation. We propose a non-linear failure envelop associated with the failure mode transition.
Zhilin Ye, Dawei Fan, Bo Li, Qizhe Tang, Jingui Xu, Dongzhou Zhang, and Wenge Zhou
Solid Earth, 13, 745–759, https://doi.org/10.5194/se-13-745-2022, https://doi.org/10.5194/se-13-745-2022, 2022
Short summary
Short summary
Eclogite is a major factor in the initiation of delamination during orogenic collision. According to the equations of state of main minerals of eclogite under high temperature and high pressure, the densities of eclogite along two types of delamination in Tibet are provided. The effects of eclogite on the delamination process are discussed in detail. A high abundance of garnet, a high Fe content, and a high degree of eclogitization are more conducive to instigating the delamination.
Tiange Xing, Hamed O. Ghaffari, Ulrich Mok, and Matej Pec
Solid Earth, 13, 137–160, https://doi.org/10.5194/se-13-137-2022, https://doi.org/10.5194/se-13-137-2022, 2022
Short summary
Short summary
Geological carbon sequestration using basalts provides a solution to mitigate the high CO2 concentration in the atmosphere. Due to the long timespan of the GCS, it is important to understand the long-term deformation of the reservoir rock. Here, we studied the creep of basalt with fluid presence. Our results show presence of fluid weakens the rock and promotes creep, while the composition only has a secondary effect and demonstrate that the governing creep mechanism is subcritical microcracking.
Lisa Winhausen, Jop Klaver, Joyce Schmatz, Guillaume Desbois, Janos L. Urai, Florian Amann, and Christophe Nussbaum
Solid Earth, 12, 2109–2126, https://doi.org/10.5194/se-12-2109-2021, https://doi.org/10.5194/se-12-2109-2021, 2021
Short summary
Short summary
An experimentally deformed sample of Opalinus Clay (OPA), which is being considered as host rock for nuclear waste in Switzerland, was studied by electron microscopy to image deformation microstructures. Deformation localised by forming micrometre-thick fractures. Deformation zones show dilatant micro-cracking, granular flow and bending grains, and pore collapse. Our model, with three different stages of damage accumulation, illustrates microstructural deformation in a compressed OPA sample.
Michael J. Schmidtke, Ruth Keppler, Jacek Kossak-Glowczewski, Nikolaus Froitzheim, and Michael Stipp
Solid Earth, 12, 1801–1828, https://doi.org/10.5194/se-12-1801-2021, https://doi.org/10.5194/se-12-1801-2021, 2021
Short summary
Short summary
Properties of deformed rocks are frequently anisotropic. One of these properties is the travel time of a seismic wave. In this study we measured the seismic anisotropy of different rocks, collected in the Alps. Our results show distinct differences between rocks of oceanic origin and those of continental origin.
Sina Hale, Xavier Ries, David Jaeggi, and Philipp Blum
Solid Earth, 12, 1581–1600, https://doi.org/10.5194/se-12-1581-2021, https://doi.org/10.5194/se-12-1581-2021, 2021
Short summary
Short summary
The construction of tunnels leads to substantial alterations of the surrounding rock, which can be critical concerning safety aspects. We use different mobile methods to assess the hydromechanical properties of an excavation damaged zone (EDZ) in a claystone. We show that long-term exposure and dehydration preserve a notable fracture permeability and significantly increase strength and stiffness. The methods are suitable for on-site monitoring without any further disturbance of the rock.
Jessica A. McBeck, Wenlu Zhu, and François Renard
Solid Earth, 12, 375–387, https://doi.org/10.5194/se-12-375-2021, https://doi.org/10.5194/se-12-375-2021, 2021
Short summary
Short summary
The competing modes of fault network development, including nucleation, propagation, and coalescence, influence the localization and connectivity of fracture networks and are thus critical influences on permeability. We distinguish between these modes of fracture development using in situ X-ray tomography triaxial compression experiments on crystalline rocks. The results underscore the importance of confining stress (burial depth) and fluids on fault network development.
Hanaya Okuda, Ikuo Katayama, Hiroshi Sakuma, and Kenji Kawai
Solid Earth, 12, 171–186, https://doi.org/10.5194/se-12-171-2021, https://doi.org/10.5194/se-12-171-2021, 2021
Short summary
Short summary
Serpentinite, generated by the hydration of ultramafic rocks, is thought to be related to slow earthquakes at the subduction plate interface in the mantle wedge. We conducted friction experiments on brucite, one of the components of serpentinite, and found that wet brucite exhibits low and unstable friction under low effective normal stress conditions. This result suggests that wet brucite may be key for slow earthquakes at the subduction plate interface in a hydrated mantle wedge.
Chaojie Cheng, Sina Hale, Harald Milsch, and Philipp Blum
Solid Earth, 11, 2411–2423, https://doi.org/10.5194/se-11-2411-2020, https://doi.org/10.5194/se-11-2411-2020, 2020
Short summary
Short summary
Fluids (like water or gases) within the Earth's crust often flow and interact with rock through fractures. The efficiency with which these fluids may flow through this void space is controlled by the width of the fracture(s). In this study, three different physical methods to measure fracture width were applied and compared and their predictive accuracy was evaluated. As a result, the mobile methods tested may well be applied in the field if a number of limitations and requirements are observed.
Martijn P. A. van den Ende, Marco M. Scuderi, Frédéric Cappa, and Jean-Paul Ampuero
Solid Earth, 11, 2245–2256, https://doi.org/10.5194/se-11-2245-2020, https://doi.org/10.5194/se-11-2245-2020, 2020
Short summary
Short summary
The injection of fluids (like wastewater or CO2) into the subsurface could cause earthquakes when existing geological faults inside the reservoir are (re-)activated. To assess the hazard associated with this, previous studies have conducted experiments in which fluids have been injected into centimetre- and decimetre-scale faults. In this work, we analyse and model these experiments. To this end, we propose a new approach through which we extract the model parameters that govern slip on faults.
Berend A. Verberne, Martijn P. A. van den Ende, Jianye Chen, André R. Niemeijer, and Christopher J. Spiers
Solid Earth, 11, 2075–2095, https://doi.org/10.5194/se-11-2075-2020, https://doi.org/10.5194/se-11-2075-2020, 2020
Short summary
Short summary
The strength of fault rock plays a central role in determining the distribution of crustal seismicity. We review laboratory work on the physics of fault friction at low shearing velocities carried out at Utrecht University in the past 2 decades. Key mechanical data and post-mortem microstructures can be explained using a generalized, physically based model for the shear of gouge-filled faults. When implemented into numerical fault-slip codes, this offers new ways to simulate the seismic cycle.
Hannes Krietsch, Valentin S. Gischig, Joseph Doetsch, Keith F. Evans, Linus Villiger, Mohammadreza Jalali, Benoît Valley, Simon Löw, and Florian Amann
Solid Earth, 11, 1699–1729, https://doi.org/10.5194/se-11-1699-2020, https://doi.org/10.5194/se-11-1699-2020, 2020
Patricio-Ignacio Pérez Donoso, Adrián-Enrique Ortiz Rojas, and Ernesto Meneses Rioseco
Solid Earth, 11, 1423–1440, https://doi.org/10.5194/se-11-1423-2020, https://doi.org/10.5194/se-11-1423-2020, 2020
Short summary
Short summary
This work studies intensively the flow in fractures with finite hydraulic conductivity intersected by a well injecting/producing at constant pressure. We demonstrated that during the bilinear flow regime the transient propagation of isobars along the fracture is proportional to the fourth root of time. Moreover, we present relations to calculate the termination time of bilinear flow under constant injection/production well pressure. Our results can be utilized to estimate the fracture length.
Caiyuan Fan, Jinfeng Liu, Luuk B. Hunfeld, and Christopher J. Spiers
Solid Earth, 11, 1399–1422, https://doi.org/10.5194/se-11-1399-2020, https://doi.org/10.5194/se-11-1399-2020, 2020
Short summary
Short summary
Coal is an important source rock for natural gas recovery, and its frictional properties play a role in induced seismicity. We performed experiments to investigate the frictional properties of bituminous coal, and our results show that the frictional strength of coal became significantly weakened with slip displacement, from a peak value of 0.5 to a steady-state value of 0.3. This may be caused by the development of shear bands with internal shear-enhanced molecular structure.
Maximilian O. Kottwitz, Anton A. Popov, Tobias S. Baumann, and Boris J. P. Kaus
Solid Earth, 11, 947–957, https://doi.org/10.5194/se-11-947-2020, https://doi.org/10.5194/se-11-947-2020, 2020
Short summary
Short summary
In this study, we conducted 3-D numerical simulations of fluid flow in synthetically generated fractures that statistically reflect geometries of naturally occurring fractures. We introduced a non-dimensional characterization scheme to relate fracture permeabilities estimated from the numerical simulations to their geometries in a unique manner. By that, we refined the scaling law for fracture permeability, which can be easily integrated into discrete-fracture-network (DFN) modeling approaches.
Bjarne S. G. Almqvist, Hagen Bender, Amanda Bergman, and Uwe Ring
Solid Earth, 11, 807–828, https://doi.org/10.5194/se-11-807-2020, https://doi.org/10.5194/se-11-807-2020, 2020
Short summary
Short summary
Rocks in fault zones can melt during earthquakes. The geometry and magnetic properties of such earthquake-melted rocks from Jämtland, central Sweden, show that they formed during Caledonian mountain building in the Palaeozoic. The small sample size (~0.2 cm3) used in this study is unconventional in studies of magnetic anisotropy and introduces challenges for interpretations. Nevertheless, the magnetic properties help shed light on the earthquake event and subsequent alteration of the rock.
David Healy, Nicholas Erik Timms, and Mark Alan Pearce
Solid Earth, 11, 259–286, https://doi.org/10.5194/se-11-259-2020, https://doi.org/10.5194/se-11-259-2020, 2020
Short summary
Short summary
Rock-forming minerals behave elastically, a property that controls their ability to support stress and strain, controls the transmission of seismic waves, and influences subsequent permanent deformation. Minerals are intrinsically anisotropic in their elastic properties; that is, they have directional variations that are related to the crystal lattice. We explore this directionality and present new ways of visualising it. We hope this will enable further advances in understanding deformation.
Patrick Selvadurai, Paul A. Selvadurai, and Morteza Nejati
Solid Earth, 10, 2001–2014, https://doi.org/10.5194/se-10-2001-2019, https://doi.org/10.5194/se-10-2001-2019, 2019
Short summary
Short summary
The paper presents an alternative technique for estimating the Biot coefficient, which governs the partitioning of stresses between a porous skeleton and the saturating pore fluid of a fluid-saturated rock.
Mathieu Soret, Philippe Agard, Benoît Ildefonse, Benoît Dubacq, Cécile Prigent, and Claudio Rosenberg
Solid Earth, 10, 1733–1755, https://doi.org/10.5194/se-10-1733-2019, https://doi.org/10.5194/se-10-1733-2019, 2019
Short summary
Short summary
This study sheds light on the mineral-scale mechanisms controlling the progressive deformation of sheared amphibolites from the Oman metamorphic sole during subduction initiation and unravels how strain is localized and accommodated in hydrated mafic rocks at high temperature conditions. Our results indicate how metamorphic reactions and pore-fluid pressures driven by changes in pressure–temperature conditions and/or water activity control the rheology of mafic rocks.
Jérôme Azzola, Benoît Valley, Jean Schmittbuhl, and Albert Genter
Solid Earth, 10, 1155–1180, https://doi.org/10.5194/se-10-1155-2019, https://doi.org/10.5194/se-10-1155-2019, 2019
Short summary
Short summary
In projects based on enhanced geothermal system (EGS) technology, knowledge of the in situ stress state is of central importance to predict the response of the rock mass to different stimulation programs. We propose a characterization of the in situ stress state from the analysis of ultrasonic borehole imager (UBI) data acquired at different key moments of the reservoir. We discuss a significant stress rotation at depth and the absence of a significant change in the stress magnitude.
Camille Parlangeau, Alexandre Dimanov, Olivier Lacombe, Simon Hallais, and Jean-Marc Daniel
Solid Earth, 10, 307–316, https://doi.org/10.5194/se-10-307-2019, https://doi.org/10.5194/se-10-307-2019, 2019
Short summary
Short summary
Calcite twinning is a common deformation mechanism that mainly occurs at low temperatures. Twinning activation appears at a critical strength value, which is poorly documented and still debated. Temperature is known to influence twin thickness and shape; however, few studies have been conducted on calcite deformation at low temperatures. The goal of this work is to determine if thickness is mainly due to high temperatures and to establish the validity of a threshold twinning activation value.
Djamil Al-Halbouni, Eoghan P. Holohan, Abbas Taheri, Martin P. J. Schöpfer, Sacha Emam, and Torsten Dahm
Solid Earth, 9, 1341–1373, https://doi.org/10.5194/se-9-1341-2018, https://doi.org/10.5194/se-9-1341-2018, 2018
Short summary
Short summary
Sinkholes are round depression features in the ground that can cause high economic and life loss. On the Dead Sea shoreline, hundreds of sinkholes form each year driven by the fall of the water level and subsequent out-washing and dissolution of loose sediments. This study investigates the mechanical formation of sinkholes by numerical modelling. It highlights the role of material strength in the formation of dangerous collapse sinkholes and compares it to findings from a field site in Jordan.
Zeyu Zhang, Sabine Kruschwitz, Andreas Weller, and Matthias Halisch
Solid Earth, 9, 1225–1238, https://doi.org/10.5194/se-9-1225-2018, https://doi.org/10.5194/se-9-1225-2018, 2018
Short summary
Short summary
We investigate the pore space of rock samples with respect to different petrophysical parameters using various methods, which provide data on pore size distributions. The resulting cumulative distributions of pore volume as a function of pore size are compared. Considering that the methods differ with regard to their limits of resolution, a multiple-length-scale characterization of the pore space geometry is proposed that is based on a combination of the results from all of these methods.
Paul W. J. Glover
Solid Earth, 8, 805–816, https://doi.org/10.5194/se-8-805-2017, https://doi.org/10.5194/se-8-805-2017, 2017
Short summary
Short summary
Electrical flow through porous media depends on the amount of conductive material available and how that material is connected. This has conventionally been described by two laws invented by Archie in 1942 which allowed only one conducting material and one non-conducting material. This paper contends that both laws arise from a single underlying law which allows for any number of materials, where their fractions sum to unity and a parameter describing their connectedness also sums to unity.
Alejandra Quintanilla-Terminel, Mark E. Zimmerman, Brian Evans, and David L. Kohlstedt
Solid Earth, 8, 751–765, https://doi.org/10.5194/se-8-751-2017, https://doi.org/10.5194/se-8-751-2017, 2017
Short summary
Short summary
Modeling natural deformation requires a good understanding of how the microscale and mesoscale properties of rocks affect bulk deformation. However, describing strain accommodation at a range of scales during rock deformation is an experimental challenge. We developed a novel technique that allows us to map strain down to the microscale. This technique was successfully applied to high-pressure, high-temperature deformation experiments and could be applied to a wide variety of geomaterials.
Guillaume Desbois, Nadine Höhne, Janos L. Urai, Pierre Bésuelle, and Gioacchino Viggiani
Solid Earth, 8, 291–305, https://doi.org/10.5194/se-8-291-2017, https://doi.org/10.5194/se-8-291-2017, 2017
Short summary
Short summary
This work integrates measurements of the mechanical and transport properties with microstructures to understand deformation mechanisms in cemented mudrock. Cataclastic mechanisms are dominant down to nanometre scale. At low strain the fabric contains recognizable open fractures, while at high strain the reworked clay gouge shows resealing of initial fracture porosity. In the future, it will provide a microphysical basis for constitutive models to improve their extrapolation for long timescales.
Paul W. J. Glover
Solid Earth, 7, 1157–1169, https://doi.org/10.5194/se-7-1157-2016, https://doi.org/10.5194/se-7-1157-2016, 2016
Short summary
Short summary
In 1942 Archie discovered equations which have been used ever since to calculate reserves of oil and gas around the world. Two equations exist, one which is theoretically justified, and one which is not. Unfortunately it is the one which is not justified that often gives the best results. This research examines the extent to which the two approaches give differing results, concluding that the Winsauer et al. form of Archie's equations is better for use with data containing systematic errors.
Tobias Kling, Da Huo, Jens-Oliver Schwarz, Frieder Enzmann, Sally Benson, and Philipp Blum
Solid Earth, 7, 1109–1124, https://doi.org/10.5194/se-7-1109-2016, https://doi.org/10.5194/se-7-1109-2016, 2016
Short summary
Short summary
A method is introduced to implement medical CT data of a fractured sandstone under varying confining pressures into fluid flow simulations to reproduce experimental permeabilities. The simulation results reproduce plausible fracture flow features (e.g. flow channeling, fracture closing/opening) and approximate the actual permeabilities, which are affected by the CT resolution and compositional matrix heterogeneities. Additionally, some recommendations are presented concerning future studies.
S. Kolzenburg, M. J. Heap, Y. Lavallée, J. K. Russell, P. G. Meredith, and D. B. Dingwell
Solid Earth, 3, 191–198, https://doi.org/10.5194/se-3-191-2012, https://doi.org/10.5194/se-3-191-2012, 2012
Cited articles
Acton, F. S.: Numerical Methods that Work, Harper and Row, New York, 1970.
Archie, G. E.: The electrical resistivity log as an aid in determining some reservoir characteristics, Pet. Tech., I, 55–62, 1942.
Bruggeman, D. A. G.: Physikalischer konstanten von heterogenen Substanzen, Ann. Phys.-Berlin, 24, 636–664, https://doi.org/10.1002/ANDP.19374210205, 1935.
Bussian, A. E.: Electrical conductance in a porous media, Geophysics, 48, 1258–1268, https://doi.org/10.1190/1.1441549, 1983.
Clavier, C., Coates, G., and Dumanoir, J.: The theoretical and experimental bases for the "Dual water" model for the interpretation of shaly sands, in SPE 52nd Annual Fall Technical Conference and Exhibition, Denver, 9–12 October, 1977.
de Witte, A. J.: Saturation and porosity from electric logs in shaly sands, Oil Gas J., 55, 89–63, 1957.
Glover, P. W. J., Pous, J., Queralt, P., Muñoz, J.-A., Liesa, M. & Hole, M. J.: Integrated two dimensional lithospheric conductivity modelling in the Pyrenees using field-scale and laboratory measurements, Earth Planet. Sc. Lett., 178, 59-72, https://doi.org/10.1016/S0012-821X(00)00066-2, 2000a.
Glover, P. W. J., Hole, M. J., and Pous, J.: A modified Archie's Law for two conducting phases, Earth Planet. Sc. Lett., 180, 369–383, https://doi.org/10.1016/S0012-821X(00)00168-0, 2000b.
Glover, P. W. J.: A generalised Archie's law for n phases, accepted for publication in Geophysics, 2010.
Guéguen, Y. and Palciauskas, V.: Introduction to the Physics of Rocks, Princeton University Press, Princeton, New Jersey, 1994.
Hanai, T.: Theory of the dielectric dispersion due to the interfacial polarization and its application to emulsions, Kolloid Z., 171, 23–31, https://doi.org/10.1007/BF01520320, 1960a.
Hanai, T.: A remark on the "Theory of the dielectric dispersion due to the interfacial polarization", Kolloid Z., 175, 61–62, https://doi.org/10.1007/BF01520118, 1960b.
Hanai, T.: Dielectric theory on the interfacial polarization for two phase mixtures, Bull. Inst. Chem. Res., 39, 341–367, 1961.
Korvin, J.: Axiomatic characterization of the general mixture rules, Geoexploration, 19, 785–796, https://doi.org/10.1016/0016-7142(82)90031-X, 1982.
Press, W. H., Teukolsky, S. A., Vetterling, W. T., and Flannery, B. P.: Numerical Recipes: The Art of Scientific Computing, 3rd edition, Cambridge University Press, Cambridge, UK, 2007.
Sen, P. N.: The dielectric and conductivity response of sedimentary rocks, SPE 55th Annual Fall Technical Conference and Exhibition, Dallas, 21–24 September, 1980.
Sen, P. N.: Relation of certain geometrical features to the dielectric anomaly of rocks, Geophysics, 46, 1714–1720, https://doi.org/10.1190/1.1441178, 1981. Sen, P. N., Scala, C., and Cohen, M. H.: Self-similar model for sedimentary rocks with application to the dielectric constant of fused glass beads, Geophysics, 46, 781–795, https://doi.org/10.1190/1.1441215, 1981.
Tenchov, G. G.: Evaluation of electrical conductivity of shaly sands using the theory of mixtures, J. Petrol. Sci. Eng., 21, 263–271, https://doi.org/10.1016/S0920-4105(98)00072-2, 1998.
Waxman, M. H. and Smits, L. J. M.: Electrical conductivities in oil-bearing shaly sand, Soc. Petrol. Eng. J., 8, 107–122, https://doi.org/10.2118/1863-A, 1968.
Wyllie, M. R. J. and Southwick, P. F.: An experimental investigation of the SP and resistivity phenomena in dirty sands, J. Petrol. Technol., 6, 44–57, https://doi.org/10.2118/302-G, 1954.
