Articles | Volume 8, issue 1
https://doi.org/10.5194/se-8-27-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
https://doi.org/10.5194/se-8-27-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
Research article
| 
10 Jan 2017
Research article |
| 10 Jan 2017
Microstructures and deformation mechanisms in Opalinus Clay: insights from scaly clay from the Main Fault in the Mont Terri Rock Laboratory (CH)
Structural Geology, Tectonics and Geomechanics, RWTH Aachen
University, Lochnerstr. 4–20, 52056 Aachen, Germany
now at: Federal Institute for Geosciences and Natural Resources
(BGR), Stilleweg 2, 30655 Hannover, Germany
Janos L. Urai
Structural Geology, Tectonics and Geomechanics, RWTH Aachen
University, Lochnerstr. 4–20, 52056 Aachen, Germany
Christophe Nussbaum
Mont Terri Consortium, Federal Office of Topography
swisstopo, Route de la Gare 63, 2882 St-Ursanne, Switzerland
Related authors
Larissa Friedenberg, Jeroen Bartol, James Bean, Steffen Beese, Hendrik Bollmann, Hans J. P. de Bresser, Jibril Coulibaly, Oliver Czaikowski, Uwe Düsterloh, Ralf Eickemeier, Ann-Kathrin Gartzke, Suzanne Hangx, Ben Laurich, Christian Lerch, Svetlana Lerche, Wenting Liu, Christoph Lüdeling, Melissa M. Mills, Nina Müller-Hoeppe, Bart van Oosterhout, Till Popp, Ole Rabbel, Michael Rahmig, Benjamin Reedlunn, Christopher Rölke, Christopher Spiers, Kristoff Svensson, Jan Thiedau, and Kornelia Zemke
Saf. Nucl. Waste Disposal, 2, 109–111, https://doi.org/10.5194/sand-2-109-2023, https://doi.org/10.5194/sand-2-109-2023, 2023
Short summary
Short summary
For the deep geological disposal of high-level nuclear waste in rock salt formations, the safety concept includes the backfilling of open cavities with crushed salt. For the prognosis of the sealing function of the backfill for the safe containment of the nuclear waste, it is crucial to have a comprehensive process understanding of the crushed-salt compaction behavior. The KOMPASS projects were initiated to improve the scientific knowledge of using crushed salt as backfill material.
Larissa Friedenberg, James Bean, Oliver Czaikowski, Uwe Düsterloh, Nina Müller-Hoeppe, Ben Laurich, Christian Lerch, Svetlana Lerche, Christoph Lüdeling, Melissa Mills, Till Popp, Benjamin Reedlunn, Dieter Stührenberg, Kristoff Svensson, Kornelia Zemke, and Juan Zhao
Saf. Nucl. Waste Disposal, 1, 121–123, https://doi.org/10.5194/sand-1-121-2021, https://doi.org/10.5194/sand-1-121-2021, 2021
Kornelia Zemke, Kristoff Svensson, Ben Laurich, and Johanna Lippmann-Pipke
Saf. Nucl. Waste Disposal, 1, 137–139, https://doi.org/10.5194/sand-1-137-2021, https://doi.org/10.5194/sand-1-137-2021, 2021
Kristoff Svensson, Kornelia Zemke, and Ben Laurich
Saf. Nucl. Waste Disposal, 1, 131–132, https://doi.org/10.5194/sand-1-131-2021, https://doi.org/10.5194/sand-1-131-2021, 2021
Gesa Ziefle, Tuanny Cajuhi, Sebastian Condamin, Stephan Costabel, Oliver Czaikowski, Antoine Fourriére, Larissa Friedenberg, Markus Furche, Nico Graebling, Bastian Graupner, Jürgen Hesser, David Jaeggi, Kyra Jantschik, Tilo Kneuker, Olaf Kolditz, Franz Königer, Herbert Kunz, Ben Laurich, Jobst Maßmann, Christian Ostertag-Henning, Dorothee Rebscher, Karsten Rink, Wolfram Rühaak, Senecio Schefer, Rainer Schuhmann, Marc Wengler, and Klaus Wieczorek
Saf. Nucl. Waste Disposal, 1, 79–81, https://doi.org/10.5194/sand-1-79-2021, https://doi.org/10.5194/sand-1-79-2021, 2021
Ben Laurich
Saf. Nucl. Waste Disposal, 1, 295–297, https://doi.org/10.5194/sand-1-295-2021, https://doi.org/10.5194/sand-1-295-2021, 2021
Ben Laurich, Jürgen Hesser, Sibylle Mayr, Lisa Winhausen, Amin Ghanizadeh, Antonia Nitsch, Julia Leuthold, Christian Weber, and Garri Gaus
Saf. Nucl. Waste Disposal, 1, 299–300, https://doi.org/10.5194/sand-1-299-2021, https://doi.org/10.5194/sand-1-299-2021, 2021
Ben Laurich, Janos L. Urai, Christian Vollmer, and Christophe Nussbaum
Solid Earth, 9, 1–24, https://doi.org/10.5194/se-9-1-2018, https://doi.org/10.5194/se-9-1-2018, 2018
Short summary
Short summary
In Switzerland, the Opalinus Clay (OPA) formation is favored to host a repository for nuclear waste. Thus, we must know its deformation behavior. In this study, we focused on the microstructure of gouge, a thin (< 2 cm), drastically strained clay layer at the so-called Main Fault in the Mont Terri rock laboratory. We suggest that in situ gouge deforms in a more viscous manner than undeformed OPA in laboratory conditions. Moreover, we speculate about the origin and evolution of the gouge layer.
Anthony Adwan, Bertrand Maillot, Pauline Souloumiac, Christophe Barnes, Christophe Nussbaum, Meinert Rahn, and Thomas Van Stiphout
Solid Earth, 15, 1445–1463, https://doi.org/10.5194/se-15-1445-2024, https://doi.org/10.5194/se-15-1445-2024, 2024
Short summary
Short summary
We use computer simulations to study how stress is distributed in large-scale geological models, focusing on how fault lines behave under pressure. By running many 2D and 3D simulations with varying conditions, we discover patterns in how faults form and interact. Our findings reveal that even small changes in conditions can lead to different stress outcomes. This research helps us better understand earthquake mechanics and could improve predictions of fault behavior in real-world scenarios.
Jens T. Birkholzer, Yves Guglielmi, and Christophe Nussbaum
Saf. Nucl. Waste Disposal, 2, 61–62, https://doi.org/10.5194/sand-2-61-2023, https://doi.org/10.5194/sand-2-61-2023, 2023
Short summary
Short summary
This presentation discusses a series of in situ experiments of fault activation by fluid injection conducted in argillite rock at the Mont Terri underground research laboratory in Switzerland to better understand whether pressurization of natural faults can lead to their reactivation and permeability generation in case such features are present near disposal tunnels. Lessons learned from these experiments help inform the safety assessment of geologic disposal in argillite host rock.
Larissa Friedenberg, Jeroen Bartol, James Bean, Steffen Beese, Hendrik Bollmann, Hans J. P. de Bresser, Jibril Coulibaly, Oliver Czaikowski, Uwe Düsterloh, Ralf Eickemeier, Ann-Kathrin Gartzke, Suzanne Hangx, Ben Laurich, Christian Lerch, Svetlana Lerche, Wenting Liu, Christoph Lüdeling, Melissa M. Mills, Nina Müller-Hoeppe, Bart van Oosterhout, Till Popp, Ole Rabbel, Michael Rahmig, Benjamin Reedlunn, Christopher Rölke, Christopher Spiers, Kristoff Svensson, Jan Thiedau, and Kornelia Zemke
Saf. Nucl. Waste Disposal, 2, 109–111, https://doi.org/10.5194/sand-2-109-2023, https://doi.org/10.5194/sand-2-109-2023, 2023
Short summary
Short summary
For the deep geological disposal of high-level nuclear waste in rock salt formations, the safety concept includes the backfilling of open cavities with crushed salt. For the prognosis of the sealing function of the backfill for the safe containment of the nuclear waste, it is crucial to have a comprehensive process understanding of the crushed-salt compaction behavior. The KOMPASS projects were initiated to improve the scientific knowledge of using crushed salt as backfill material.
Jessica Barabasch, Joyce Schmatz, Jop Klaver, Alexander Schwedt, and Janos L. Urai
Solid Earth, 14, 271–291, https://doi.org/10.5194/se-14-271-2023, https://doi.org/10.5194/se-14-271-2023, 2023
Short summary
Short summary
We analysed Zechstein salt with microscopes and observed specific microstructures that indicate much faster deformation in rock salt with fine halite grains when compared to salt with larger grains. This is important because people build large cavities in the subsurface salt for energy storage or want to deposit radioactive waste inside it. When engineers and scientists use grain-size data and equations that include this mechanism, it will help to make better predictions in geological models.
Trudy M. Wassenaar, Cees W. Passchier, Nora Groschopf, Anna Jantschke, Regina Mertz-Kraus, and Janos L. Urai
Biogeosciences Discuss., https://doi.org/10.5194/bg-2023-32, https://doi.org/10.5194/bg-2023-32, 2023
Manuscript not accepted for further review
Short summary
Short summary
Marbles in the desert areas of Namibia and Oman were found to be consumed from inside the rock mass by microbiological activity of a thus far unknown nature that created bands of parallel tubules. These bands formed along fractures in the rock and only surfaced after erosion made them visible. We consider this a new niche for life that has so far not been described. These life forms may have an unknown impact on the global carbon cycle.
Sivaji Lahiri, Kitty L. Milliken, Peter Vrolijk, Guillaume Desbois, and Janos L. Urai
Solid Earth, 13, 1513–1539, https://doi.org/10.5194/se-13-1513-2022, https://doi.org/10.5194/se-13-1513-2022, 2022
Short summary
Short summary
Understanding the mechanism of mechanical compaction is important. Previous studies on mechanical compaction were mostly done by performing experiments. Studies on natural rocks are rare due to compositional heterogeneity of the sedimentary succession with depth. Due to remarkable similarity in composition and grain size, the Sumatra subduction complex provides a unique opportunity to study the micromechanism of mechanical compaction on natural samples.
Manuel D. Menzel, Janos L. Urai, Estibalitz Ukar, Thierry Decrausaz, and Marguerite Godard
Solid Earth, 13, 1191–1218, https://doi.org/10.5194/se-13-1191-2022, https://doi.org/10.5194/se-13-1191-2022, 2022
Short summary
Short summary
Mantle rocks can bind large quantities of carbon by reaction with CO2, but this capacity requires fluid pathways not to be clogged by carbonate. We studied mantle rocks from Oman to understand the mechanisms allowing their transformation into carbonate and quartz. Using advanced imaging techniques, we show that abundant veins were essential fluid pathways driving the reaction. Our results show that tectonic stress was important for fracture opening and a key ingredient for carbon fixation.
Lisa Winhausen, Kavan Khaledi, Mohammadreza Jalali, Janos L. Urai, and Florian Amann
Solid Earth, 13, 901–915, https://doi.org/10.5194/se-13-901-2022, https://doi.org/10.5194/se-13-901-2022, 2022
Short summary
Short summary
Triaxial compression tests at different effective stresses allow for analysing the deformation behaviour of Opalinus Clay, the potential host rock for nuclear waste in Switzerland. We conducted microstructural investigations of the deformed samples to relate the bulk hydro-mechanical behaviour to the processes on the microscale. Results show a transition from brittle- to more ductile-dominated deformation. We propose a non-linear failure envelop associated with the failure mode transition.
Larissa Friedenberg, James Bean, Oliver Czaikowski, Uwe Düsterloh, Nina Müller-Hoeppe, Ben Laurich, Christian Lerch, Svetlana Lerche, Christoph Lüdeling, Melissa Mills, Till Popp, Benjamin Reedlunn, Dieter Stührenberg, Kristoff Svensson, Kornelia Zemke, and Juan Zhao
Saf. Nucl. Waste Disposal, 1, 121–123, https://doi.org/10.5194/sand-1-121-2021, https://doi.org/10.5194/sand-1-121-2021, 2021
Kornelia Zemke, Kristoff Svensson, Ben Laurich, and Johanna Lippmann-Pipke
Saf. Nucl. Waste Disposal, 1, 137–139, https://doi.org/10.5194/sand-1-137-2021, https://doi.org/10.5194/sand-1-137-2021, 2021
Kristoff Svensson, Kornelia Zemke, and Ben Laurich
Saf. Nucl. Waste Disposal, 1, 131–132, https://doi.org/10.5194/sand-1-131-2021, https://doi.org/10.5194/sand-1-131-2021, 2021
Gesa Ziefle, Tuanny Cajuhi, Sebastian Condamin, Stephan Costabel, Oliver Czaikowski, Antoine Fourriére, Larissa Friedenberg, Markus Furche, Nico Graebling, Bastian Graupner, Jürgen Hesser, David Jaeggi, Kyra Jantschik, Tilo Kneuker, Olaf Kolditz, Franz Königer, Herbert Kunz, Ben Laurich, Jobst Maßmann, Christian Ostertag-Henning, Dorothee Rebscher, Karsten Rink, Wolfram Rühaak, Senecio Schefer, Rainer Schuhmann, Marc Wengler, and Klaus Wieczorek
Saf. Nucl. Waste Disposal, 1, 79–81, https://doi.org/10.5194/sand-1-79-2021, https://doi.org/10.5194/sand-1-79-2021, 2021
Ben Laurich
Saf. Nucl. Waste Disposal, 1, 295–297, https://doi.org/10.5194/sand-1-295-2021, https://doi.org/10.5194/sand-1-295-2021, 2021
Ben Laurich, Jürgen Hesser, Sibylle Mayr, Lisa Winhausen, Amin Ghanizadeh, Antonia Nitsch, Julia Leuthold, Christian Weber, and Garri Gaus
Saf. Nucl. Waste Disposal, 1, 299–300, https://doi.org/10.5194/sand-1-299-2021, https://doi.org/10.5194/sand-1-299-2021, 2021
Rahul Prabhakaran, Giovanni Bertotti, Janos Urai, and David Smeulders
Solid Earth, 12, 2159–2209, https://doi.org/10.5194/se-12-2159-2021, https://doi.org/10.5194/se-12-2159-2021, 2021
Short summary
Short summary
Rock fractures are organized as networks with spatially varying arrangements. Due to networks' influence on bulk rock behaviour, it is important to quantify network spatial variation. We utilize an approach where fracture networks are treated as spatial graphs. By combining graph similarity measures with clustering techniques, spatial clusters within large-scale fracture networks are identified and organized hierarchically. The method is validated on a dataset with nearly 300 000 fractures.
Lisa Winhausen, Jop Klaver, Joyce Schmatz, Guillaume Desbois, Janos L. Urai, Florian Amann, and Christophe Nussbaum
Solid Earth, 12, 2109–2126, https://doi.org/10.5194/se-12-2109-2021, https://doi.org/10.5194/se-12-2109-2021, 2021
Short summary
Short summary
An experimentally deformed sample of Opalinus Clay (OPA), which is being considered as host rock for nuclear waste in Switzerland, was studied by electron microscopy to image deformation microstructures. Deformation localised by forming micrometre-thick fractures. Deformation zones show dilatant micro-cracking, granular flow and bending grains, and pore collapse. Our model, with three different stages of damage accumulation, illustrates microstructural deformation in a compressed OPA sample.
Marta Adamuszek, Dan M. Tămaş, Jessica Barabasch, and Janos L. Urai
Solid Earth, 12, 2041–2065, https://doi.org/10.5194/se-12-2041-2021, https://doi.org/10.5194/se-12-2041-2021, 2021
Short summary
Short summary
We analyse folded multilayer sequences in the Ocnele Mari salt mine (Romania) to gain insight into the long-term rheological behaviour of rock salt. Our results indicate the large role of even a small number of impurities in the rock salt for its effective mechanical behaviour. We demonstrate how the development of folds that occur at various scales can be used to constrain the viscosity ratio in the deformed multilayer sequence.
Alba Zappone, Antonio Pio Rinaldi, Melchior Grab, Quinn C. Wenning, Clément Roques, Claudio Madonna, Anne C. Obermann, Stefano M. Bernasconi, Matthias S. Brennwald, Rolf Kipfer, Florian Soom, Paul Cook, Yves Guglielmi, Christophe Nussbaum, Domenico Giardini, Marco Mazzotti, and Stefan Wiemer
Solid Earth, 12, 319–343, https://doi.org/10.5194/se-12-319-2021, https://doi.org/10.5194/se-12-319-2021, 2021
Short summary
Short summary
The success of the geological storage of carbon dioxide is linked to the availability at depth of a capable reservoir and an impermeable caprock. The sealing capacity of the caprock is a key parameter for long-term CO2 containment. Faults crosscutting the caprock might represent preferential pathways for CO2 to escape. A decameter-scale experiment on injection in a fault, monitored by an integrated network of multiparamerter sensors, sheds light on the mobility of fluids within the fault.
Christopher Weismüller, Rahul Prabhakaran, Martijn Passchier, Janos L. Urai, Giovanni Bertotti, and Klaus Reicherter
Solid Earth, 11, 1773–1802, https://doi.org/10.5194/se-11-1773-2020, https://doi.org/10.5194/se-11-1773-2020, 2020
Short summary
Short summary
We photographed a fractured limestone pavement with a drone to compare manual and automatic fracture tracing and analyze the evolution and spatial variation of the fracture network in high resolution. We show that automated tools can produce results comparable to manual tracing in shorter time but do not yet allow the interpretation of fracture generations. This work pioneers the automatic fracture mapping of a complete outcrop in detail, and the results can be used as fracture benchmark.
Heijn van Gent and Janos L. Urai
Solid Earth, 11, 513–526, https://doi.org/10.5194/se-11-513-2020, https://doi.org/10.5194/se-11-513-2020, 2020
Short summary
Short summary
Faults form due to stresses caused by crustal processes. As faults influence the stress field locally, fault interaction leads to local variations in the stress field, but this is difficult to observe directly.
We describe an outcrop of one fault abuting into another one. By careful measurement of structures in the overlapping deformation zones and separating them using published relative age data, we show a rotation in the local stress field resulting from the faults growing to each other
Christopher Weismüller, Janos L. Urai, Michael Kettermann, Christoph von Hagke, and Klaus Reicherter
Solid Earth, 10, 1757–1784, https://doi.org/10.5194/se-10-1757-2019, https://doi.org/10.5194/se-10-1757-2019, 2019
Short summary
Short summary
We use drones to study surface geometries of massively dilatant faults (MDFs) in Iceland, with apertures up to tens of meters at the surface. Based on throw, aperture and structures, we define three geometrically different endmembers of the surface expression of MDFs and show that they belong to one continuum. The transition between the endmembers is fluent and can change at one fault over short distances, implying less distinct control of deeper structures on surface geometries than expected.
Mark G. Rowan, Janos L. Urai, J. Carl Fiduk, and Peter A. Kukla
Solid Earth, 10, 987–1013, https://doi.org/10.5194/se-10-987-2019, https://doi.org/10.5194/se-10-987-2019, 2019
Short summary
Short summary
Ancient evaporite sequences were deposited as interlayered rocksalt, other evaporites, and non-evaporite rocks that have enormous differences in strength. Whereas the ductile layers flow during deformation, strong layers are folded and/or torn apart, with the intrasalt deformation dependent on the mode and history of salt tectonics. This has important implications for accurately imaging and interpreting subsurface seismic data and for drilling wells through evaporite sequences.
Ismay Vénice Akker, Josef Kaufmann, Guillaume Desbois, Jop Klaver, Janos L. Urai, Alfons Berger, and Marco Herwegh
Solid Earth, 9, 1141–1156, https://doi.org/10.5194/se-9-1141-2018, https://doi.org/10.5194/se-9-1141-2018, 2018
Short summary
Short summary
We studied porosity changes of slates from eastern Switzerland, which were deposited in an ocean in front of the emerging Alps during the Cenozoic. The Alpine collision between the European and African plates brought the rocks from this basin to today’s position in the Alps. From the basin to the surface, the porosity first decreased down to a small number of round cavities (<1 vol%) to microfractures, and once at the surface, the porosity increased again due to the formation of macro-fractures.
Simon Virgo, Christoph von Hagke, and Janos L. Urai
Solid Earth, 9, 91–113, https://doi.org/10.5194/se-9-91-2018, https://doi.org/10.5194/se-9-91-2018, 2018
Short summary
Short summary
The marbles of the migmatitic dome on the island Naxos contain deformed layers of amphibolite with multiple phases of boudinage. The boudins formed by E–W shortening normal to the layers and layer parallel extension in various directions. We identified five different generations of boudins that show that E–W shortening is the prevalent deformation in these rocks during the peak metamorphosis and the following cooling, different from other parts of the island dominated by top-to-north shearing.
Ben Laurich, Janos L. Urai, Christian Vollmer, and Christophe Nussbaum
Solid Earth, 9, 1–24, https://doi.org/10.5194/se-9-1-2018, https://doi.org/10.5194/se-9-1-2018, 2018
Short summary
Short summary
In Switzerland, the Opalinus Clay (OPA) formation is favored to host a repository for nuclear waste. Thus, we must know its deformation behavior. In this study, we focused on the microstructure of gouge, a thin (< 2 cm), drastically strained clay layer at the so-called Main Fault in the Mont Terri rock laboratory. We suggest that in situ gouge deforms in a more viscous manner than undeformed OPA in laboratory conditions. Moreover, we speculate about the origin and evolution of the gouge layer.
Guillaume Desbois, Nadine Höhne, Janos L. Urai, Pierre Bésuelle, and Gioacchino Viggiani
Solid Earth, 8, 291–305, https://doi.org/10.5194/se-8-291-2017, https://doi.org/10.5194/se-8-291-2017, 2017
Short summary
Short summary
This work integrates measurements of the mechanical and transport properties with microstructures to understand deformation mechanisms in cemented mudrock. Cataclastic mechanisms are dominant down to nanometre scale. At low strain the fabric contains recognizable open fractures, while at high strain the reworked clay gouge shows resealing of initial fracture porosity. In the future, it will provide a microphysical basis for constitutive models to improve their extrapolation for long timescales.
A. F. Raith, F. Strozyk, J. Visser, and J. L. Urai
Solid Earth, 7, 67–82, https://doi.org/10.5194/se-7-67-2016, https://doi.org/10.5194/se-7-67-2016, 2016
Short summary
Short summary
3D seismic and well data were used to study the evolution of salt pillows with extreme mechanical stratification to gain a better understanding of layered evaporite deposits. During evaporation an active basement graben caused the local accumulation of thick K-Mg salts. The resulting structure after the following extensional and compressional salt flow was strongly influenced by folding of the ruptured ZIII-AC stringer, leading to thickening and internal deformation of the soft K-Mg salt layers.
Related subject area
Structural geology
Origin of the Bohai Sea Basin, North China Craton, and implications for bidirectional back-arc extension in the East Asian continental margin
Earthquake swarms frozen in an exhumed hydrothermal system (Bolfin Fault Zone, Chile)
Reconciling post-orogenic faulting, paleostress evolution, and structural inheritance in the seismogenic northern Apennines (Italy): insights from the Monti Martani Fault System
Understanding the stress field at the lateral termination of a thrust fold using generic geomechanical models and clustering methods
Localized shear and distributed strain accumulation as competing shear accommodation mechanisms in crustal shear zones: constraining their dictating factors
Influence of water on crystallographic preferred orientation patterns in a naturally deformed quartzite
Geomorphic expressions of active rifting reflect the role of structural inheritance: a new model for the evolution of the Shanxi Rift, northern China
Driven magmatism and crustal thinning of coastal southern China in response to subduction
Selection and characterization of the target fault for fluid-induced activation and earthquake rupture experiments
Naturally fractured reservoir characterisation in heterogeneous sandstones: insight for uranium in situ recovery (Imouraren, Niger)
Multiscalar 3D temporal structural characterisation of Smøla island, mid-Norwegian passive margin: an analogue for unravelling the tectonic history of offshore basement highs
Extensional fault geometry and evolution within rifted margin hyper-extended continental crust leading to mantle exhumation and allochthon formation
Impact of faults on the remote stress state
Subduction plate interface shear stress associated with rapid subduction at deep slow earthquake depths: example from the Sanbagawa belt, southwestern Japan
Multiple phase rifting and subsequent inversion in the West Netherlands Basin: implications for geothermal reservoir characterization
Analogue modelling of basin inversion: implications for the Araripe Basin (Brazil)
Natural fracture patterns at Swift Reservoir anticline, NW Montana: the influence of structural position and lithology from multiple observation scales
Rapid hydration and weakening of anhydrite under stress: implications for natural hydration in the Earth's crust and mantle
Analogue experiments on releasing and restraining bends and their application to the study of the Barents Shear Margin
Structural framework and timing of the Pahtohavare Cu ± Au deposits, Kiruna mining district, Sweden
Does the syn- versus post-rift thickness ratio have an impact on the inversion-related structural style?
Inversion of accommodation zones in salt-bearing extensional systems: insights from analog modeling
Structural control of inherited salt structures during inversion of a domino basement-fault system from an analogue modelling approach
Kinematics and time-resolved evolution of the main thrust-sense shear zone in the Eo-Alpine orogenic wedge (the Vinschgau Shear Zone, eastern Alps)
Role of inheritance during tectonic inversion of a rift system in basement-involved to salt-decoupled transition: analogue modelling and application to the Pyrenean–Biscay system
Water release and homogenization by dynamic recrystallization of quartz
Hydrothermal activity of the Lake Abhe geothermal field (Djibouti): Structural controls and paths for further exploration
Time-dependent frictional properties of granular materials used in analogue modelling: implications for mimicking fault healing during reactivation and inversion
Large grain-size-dependent rheology contrasts of halite at low differential stress: evidence from microstructural study of naturally deformed gneissic Zechstein 2 rock salt (Kristallbrockensalz) from the northern Netherlands
Analogue modelling of the inversion of multiple extensional basins in foreland fold-and-thrust belts
A contribution to the quantification of crustal shortening and kinematics of deformation across the Western Andes ( ∼ 20–22° S)
Rift thermal inheritance in the SW Alps (France): insights from RSCM thermometry and 1D thermal numerical modelling
The Luangwa Rift Active Fault Database and fault reactivation along the southwestern branch of the East African Rift
Clustering has a meaning: optimization of angular similarity to detect 3D geometric anomalies in geological terrains
Shear zone evolution and the path of earthquake rupture
Mechanical compaction mechanisms in the input sediments of the Sumatra subduction complex – insights from microstructural analysis of cores from IODP Expedition 362
Detecting micro fractures: a comprehensive comparison of conventional and machine-learning-based segmentation methods
Multiscale lineament analysis and permeability heterogeneity of fractured crystalline basement blocks
Structural characterization and K–Ar illite dating of reactivated, complex and heterogeneous fault zones: lessons from the Zuccale Fault, Northern Apennines
How do differences in interpreting seismic images affect estimates of geological slip rates?
Progressive veining during peridotite carbonation: insights from listvenites in Hole BT1B, Samail ophiolite (Oman)
Tectonic evolution of the Indio Hills segment of the San Andreas fault in southern California, southwestern USA
Structural diagenesis in ultra-deep tight sandstones in the Kuqa Depression, Tarim Basin, China
Variscan structures and their control on latest to post-Variscan basin architecture: insights from the westernmost Bohemian Massif and southeastern Germany
Multi-disciplinary characterizations of the BedrettoLab – a new underground geoscience research facility
Biotite supports long-range diffusive transport in dissolution–precipitation creep in halite through small porosity fluctuations
De-risking the energy transition by quantifying the uncertainties in fault stability
Virtual field trip to the Esla Nappe (Cantabrian Zone, NW Spain): delivering traditional geological mapping skills remotely using real data
Marine forearc structure of eastern Java and its role in the 1994 Java tsunami earthquake
Roughness of fracture surfaces in numerical models and laboratory experiments
Alan Liu Chen and Xuanhua Chen
Solid Earth, 16, 63–80, https://doi.org/10.5194/se-16-63-2025, https://doi.org/10.5194/se-16-63-2025, 2025
Short summary
Short summary
Based on the construction of a major fault system and investigation of several main boundaries of the Bohai Sea Basin, eastern China, we propose a right-lateral strike-slip fault between the eastern margin of the Liaodong Peninsula and the northwestern margin of the Jiaodong Peninsula. Then, we suggest that the two-direction extension perpendicular and parallel to the subduction zone should be the genesis of the Bohai Sea Basin and also the basic pattern of the back-arc extension.
Simone Masoch, Giorgio Pennacchioni, Michele Fondriest, Rodrigo Gomila, Piero Poli, José Cembrano, and Giulio Di Toro
Solid Earth, 16, 23–43, https://doi.org/10.5194/se-16-23-2025, https://doi.org/10.5194/se-16-23-2025, 2025
Short summary
Short summary
We investigate an exhumed hydrothermal system in the Atacama Desert (Chile) to understand how earthquake swarms form. Wall rocks near fault veins experienced high-stress pulses, and fault veins underwent cyclic crack opening and shearing. These findings suggest ancient earthquake swarm activity, from dynamic crack propagation to repeated crack opening and shearing. This system represents a unique geological record of earthquake swarms, providing insights into their initiation and evolution.
Riccardo Asti, Selina Bonini, Giulio Viola, and Gianluca Vignaroli
Solid Earth, 15, 1525–1551, https://doi.org/10.5194/se-15-1525-2024, https://doi.org/10.5194/se-15-1525-2024, 2024
Short summary
Short summary
This study addresses the tectonic evolution of the seismogenic Monti Martani Fault System (northern Apennines, Italy). By applying a field-based structural geology approach, we reconstruct the evolution of the stress field and we challenge the current interpretation of the fault system in terms of both geometry and state of activity. We stress that the peculiar behavior of this system during post-orogenic extension is still significantly influenced by the pre-orogenic structural template.
Anthony Adwan, Bertrand Maillot, Pauline Souloumiac, Christophe Barnes, Christophe Nussbaum, Meinert Rahn, and Thomas Van Stiphout
Solid Earth, 15, 1445–1463, https://doi.org/10.5194/se-15-1445-2024, https://doi.org/10.5194/se-15-1445-2024, 2024
Short summary
Short summary
We use computer simulations to study how stress is distributed in large-scale geological models, focusing on how fault lines behave under pressure. By running many 2D and 3D simulations with varying conditions, we discover patterns in how faults form and interact. Our findings reveal that even small changes in conditions can lead to different stress outcomes. This research helps us better understand earthquake mechanics and could improve predictions of fault behavior in real-world scenarios.
Pramit Chatterjee, Arnab Roy, and Nibir Mandal
Solid Earth, 15, 1281–1301, https://doi.org/10.5194/se-15-1281-2024, https://doi.org/10.5194/se-15-1281-2024, 2024
Short summary
Short summary
Understanding strain accumulation processes in shear zones is essential for explaining failure mechanisms at great crustal depths. This study explores the rheological and kinematic factors determining the varying modes of shear accommodation in natural shear zones. Numerical simulations suggest that an interplay of parameters – initial viscosity, bulk shear rate, and internal cohesion – governs the dominance of one accommodation mechanism over another.
Jeffrey M. Rahl, Brendan Moehringer, Kenneth S. Befus, and John S. Singleton
Solid Earth, 15, 1233–1240, https://doi.org/10.5194/se-15-1233-2024, https://doi.org/10.5194/se-15-1233-2024, 2024
Short summary
Short summary
At the high temperatures present in the deeper crust, minerals such as quartz can flow much like silly putty. The detailed mechanisms of how atoms are reorganized depends upon several factors, such as the temperature and the rate of which the mineral changes shape. We present observations from a naturally deformed rock showing that the amount of water present also influences the type of deformation in quartz, with implications for geological interpretations.
Malte Froemchen, Ken J. W. McCaffrey, Mark B. Allen, Jeroen van Hunen, Thomas B. Phillips, and Yueren Xu
Solid Earth, 15, 1203–1231, https://doi.org/10.5194/se-15-1203-2024, https://doi.org/10.5194/se-15-1203-2024, 2024
Short summary
Short summary
The Shanxi Rift is a young, active rift in northern China that formed atop a Proterozoic orogen. The impact of these structures on active rift faults is poorly understood. Here, we quantify the landscape response to active faulting and compare it with published maps of inherited structures. We find that inherited structures played an important role in the segmentation of the Shanxi Rift and in the development of rift interaction zones, which are the most active regions in the Shanxi Rift.
Jinbao Su, Wenbin Zhu, and Guangwei Li
Solid Earth, 15, 1133–1141, https://doi.org/10.5194/se-15-1133-2024, https://doi.org/10.5194/se-15-1133-2024, 2024
Short summary
Short summary
The late Mesozoic igneous rocks in the South China Block exhibit flare-ups and lulls, which form in compressional or extensional backgrounds. The ascending of magma forms a mush-like head and decreases crustal thickness. The presence of faults and pre-existing magmas will accelerate emplacement of underplating magma. The magmatism at different times may be formed under similar subduction conditions, and the boundary compression forces will delay magma ascent.
Peter Achtziger-Zupančič, Alberto Ceccato, Alba Simona Zappone, Giacomo Pozzi, Alexis Shakas, Florian Amann, Whitney Maria Behr, Daniel Escallon Botero, Domenico Giardini, Marian Hertrich, Mohammadreza Jalali, Xiaodong Ma, Men-Andrin Meier, Julian Osten, Stefan Wiemer, and Massimo Cocco
Solid Earth, 15, 1087–1112, https://doi.org/10.5194/se-15-1087-2024, https://doi.org/10.5194/se-15-1087-2024, 2024
Short summary
Short summary
We detail the selection and characterization of a fault zone for earthquake experiments in the Fault Activation and Earthquake Ruptures (FEAR) project at the Bedretto Lab. FEAR, which studies earthquake processes, overcame data collection challenges near faults. The fault zone in Rotondo granite was selected based on geometry, monitorability, and hydro-mechanical properties. Remote sensing, borehole logging, and geological mapping were used to create a 3D model for precise monitoring.
Maxime Jamet, Gregory Ballas, Roger Soliva, Olivier Gerbeaud, Thierry Lefebvre, Christine Leredde, and Didier Loggia
Solid Earth, 15, 895–920, https://doi.org/10.5194/se-15-895-2024, https://doi.org/10.5194/se-15-895-2024, 2024
Short summary
Short summary
This study characterizes the Tchirezrine II sandstone reservoir in northern Niger. Crucial for potential uranium in situ recovery (ISR), our multifaceted approach reveals (i) a network of homogeneously distributed orthogonal structures, (ii) the impact of clustered E–W fault structures on anisotropic fluid flow, and (iii) local changes in the matrix behaviour of the reservoir as a function of the density and nature of the deformation structure.
Matthew S. Hodge, Guri Venvik, Jochen Knies, Roelant van der Lelij, Jasmin Schönenberger, Øystein Nordgulen, Marco Brönner, Aziz Nasuti, and Giulio Viola
Solid Earth, 15, 589–615, https://doi.org/10.5194/se-15-589-2024, https://doi.org/10.5194/se-15-589-2024, 2024
Short summary
Short summary
Smøla island, in the mid-Norwegian margin, has complex fracture and fault patterns resulting from tectonic activity. This study uses a multiple-method approach to unravel Smøla's tectonic history. We found five different phases of deformation related to various fracture geometries and minerals dating back hundreds of millions of years. 3D models of these features visualise these structures in space. This approach may help us to understand offshore oil and gas reservoirs hosted in the basement.
Júlia Gómez-Romeu and Nick Kusznir
Solid Earth, 15, 477–492, https://doi.org/10.5194/se-15-477-2024, https://doi.org/10.5194/se-15-477-2024, 2024
Short summary
Short summary
We investigate the extensional fault geometry and its evolution during the stretching and thinning of continental crust and lithosphere leading to continental breakup. We focus on the fault-controlled processes that thin and rupture the final 10 km of continental crust at magma-poor margins prior to mantle exhumation. We show that isostatic fault rotation in response to extension is fundamental to understanding the formation of tectonic structures observed on seismic reflection data.
Karsten Reiter, Oliver Heidbach, and Moritz O. Ziegler
Solid Earth, 15, 305–327, https://doi.org/10.5194/se-15-305-2024, https://doi.org/10.5194/se-15-305-2024, 2024
Short summary
Short summary
It is generally assumed that faults have an influence on the stress state of the Earth’s crust. It is questionable whether this influence is still present far away from a fault. Simple numerical models were used to investigate the extent of the influence of faults on the stress state. Several models with different fault representations were investigated. The stress fluctuations further away from the fault (> 1 km) are very small.
Yukinojo Koyama, Simon R. Wallis, and Takayoshi Nagaya
Solid Earth, 15, 143–166, https://doi.org/10.5194/se-15-143-2024, https://doi.org/10.5194/se-15-143-2024, 2024
Short summary
Short summary
Stress along a subduction plate boundary is important for understanding subduction phenomena such as earthquakes. We estimated paleo-stress using quartz recrystallized grain size combined with deformation temperature and P–T paths of exhumed rocks. The obtained results show differential stresses of 30.8–82.7 MPa consistent over depths of 17–27 km in the paleo-subduction boundary. The obtained stress may represent the initial conditions under which slow earthquakes nucleated in the same domain.
Annelotte Weert, Kei Ogata, Francesco Vinci, Coen Leo, Giovanni Bertotti, Jerome Amory, and Stefano Tavani
Solid Earth, 15, 121–141, https://doi.org/10.5194/se-15-121-2024, https://doi.org/10.5194/se-15-121-2024, 2024
Short summary
Short summary
On the road to a sustainable planet, geothermal energy is considered one of the main substitutes when it comes to heating. The geological history of an area can have a major influence on the application of these geothermal systems, as demonstrated in the West Netherlands Basin. Here, multiple episodes of rifting and subsequent basin inversion have controlled the distribution of the reservoir rocks, thus influencing the locations where geothermal energy can be exploited.
Pâmela C. Richetti, Frank Zwaan, Guido Schreurs, Renata S. Schmitt, and Timothy C. Schmid
Solid Earth, 14, 1245–1266, https://doi.org/10.5194/se-14-1245-2023, https://doi.org/10.5194/se-14-1245-2023, 2023
Short summary
Short summary
The Araripe Basin in NE Brazil was originally formed during Cretaceous times, as South America and Africa broke up. The basin is an important analogue to offshore South Atlantic break-up basins; its sediments were uplifted and are now found at 1000 m height, allowing for studies thereof, but the cause of the uplift remains debated. Here we ran a series of tectonic laboratory experiments that show how a specific plate tectonic configuration can explain the evolution of the Araripe Basin.
Adam J. Cawood, Hannah Watkins, Clare E. Bond, Marian J. Warren, and Mark A. Cooper
Solid Earth, 14, 1005–1030, https://doi.org/10.5194/se-14-1005-2023, https://doi.org/10.5194/se-14-1005-2023, 2023
Short summary
Short summary
Here we test conceptual models of fracture development by investigating fractures across multiple scales. We find that most fractures increase in abundance towards the fold hinge, and we interpret these as being fold related. Other fractures at the site show inconsistent orientations and are unrelated to fold formation. Our results show that predicting fracture patterns requires the consideration of multiple geologic variables.
Johanna Heeb, David Healy, Nicholas E. Timms, and Enrique Gomez-Rivas
Solid Earth, 14, 985–1003, https://doi.org/10.5194/se-14-985-2023, https://doi.org/10.5194/se-14-985-2023, 2023
Short summary
Short summary
Hydration of rocks is a key process in the Earth’s crust and mantle that is accompanied by changes in physical traits and mechanical behaviour of rocks. This study assesses the influence of stress on hydration reaction kinetics and mechanics in experiments on anhydrite. We show that hydration occurs readily under stress and results in localized hydration along fractures and mechanic weakening. New gypsum growth is selective and depends on the stress field and host anhydrite crystal orientation.
Roy Helge Gabrielsen, Panagiotis Athanasios Giannenas, Dimitrios Sokoutis, Ernst Willingshofer, Muhammad Hassaan, and Jan Inge Faleide
Solid Earth, 14, 961–983, https://doi.org/10.5194/se-14-961-2023, https://doi.org/10.5194/se-14-961-2023, 2023
Short summary
Short summary
The Barents Shear Margin defines the border between the relatively shallow Barents Sea that is situated on a continental plate and the deep ocean. This margin's evolution history was probably influenced by plate tectonic reorganizations. From scaled experiments, we deduced several types of structures (faults, folds, and sedimentary basins) that help us to improve the understanding of the history of the opening of the North Atlantic.
Leslie Logan, Ervin Veress, Joel B. H. Andersson, Olof Martinsson, and Tobias E. Bauer
Solid Earth, 14, 763–784, https://doi.org/10.5194/se-14-763-2023, https://doi.org/10.5194/se-14-763-2023, 2023
Short summary
Short summary
The Pahtohavare Cu ± Au deposits in the Kiruna mining district have a dubious timing of formation and have not been contextualized within an up-to-date tectonic framework. Structural mapping was carried out to reveal that the deposits are hosted in brittle structures that cut a noncylindrical, SE-plunging anticline constrained to have formed during the late-Svecokarelian orogeny. These results show that Cu ± Au mineralization formed more than ca. 80 Myr after iron oxide–apatite mineralization.
Alexandra Tamas, Dan M. Tamas, Gabor Tari, Csaba Krezsek, Alexandru Lapadat, and Zsolt Schleder
Solid Earth, 14, 741–761, https://doi.org/10.5194/se-14-741-2023, https://doi.org/10.5194/se-14-741-2023, 2023
Short summary
Short summary
Tectonic processes are complex and often difficult to understand due to the limitations of surface or subsurface data. One such process is inversion tectonics, which means that an area initially developed in an extension (such as the opening of an ocean) is reversed to compression (the process leading to mountain building). In this research, we use a laboratory method (analogue modelling), and with the help of a sandbox, we try to better understand structures (folds/faults) related to inversion.
Elizabeth Parker Wilson, Pablo Granado, Pablo Santolaria, Oriol Ferrer, and Josep Anton Muñoz
Solid Earth, 14, 709–739, https://doi.org/10.5194/se-14-709-2023, https://doi.org/10.5194/se-14-709-2023, 2023
Short summary
Short summary
This work focuses on the control of accommodation zones on extensional and subsequent inversion in salt-detached domains using sandbox analogue models. During extension, the transfer zone acts as a pathway for the movement of salt, changing the expected geometries. When inverted, the salt layer and syn-inversion sedimentation control the deformation style in the salt-detached cover system. Three natural cases are compared to the model results and show similar inversion geometries.
Oriol Ferrer, Eloi Carola, and Ken McClay
Solid Earth, 14, 571–589, https://doi.org/10.5194/se-14-571-2023, https://doi.org/10.5194/se-14-571-2023, 2023
Short summary
Short summary
Using an experimental approach based on scaled sandbox models, this work aims to understand how salt above different rotational fault blocks influences the cover geometry and evolution, first during extension and then during inversion. The results show that inherited salt structures constrain contractional deformation. We show for the first time how welds and fault welds are reopened during contractional deformation, having direct implications for the subsurface exploration of natural resources.
Chiara Montemagni, Stefano Zanchetta, Martina Rocca, Igor M. Villa, Corrado Morelli, Volkmar Mair, and Andrea Zanchi
Solid Earth, 14, 551–570, https://doi.org/10.5194/se-14-551-2023, https://doi.org/10.5194/se-14-551-2023, 2023
Short summary
Short summary
The Vinschgau Shear Zone (VSZ) is one of the largest and most significant shear zones developed within the Late Cretaceous thrust stack in the Austroalpine domain of the eastern Alps. 40Ar / 39Ar geochronology constrains the activity of the VSZ between 97 and 80 Ma. The decreasing vorticity towards the core of the shear zone, coupled with the younging of mylonites, points to a shear thinning behavior. The deepest units of the Eo-Alpine orogenic wedge were exhumed along the VSZ.
Jordi Miró, Oriol Ferrer, Josep Anton Muñoz, and Gianreto Manastchal
Solid Earth, 14, 425–445, https://doi.org/10.5194/se-14-425-2023, https://doi.org/10.5194/se-14-425-2023, 2023
Short summary
Short summary
Using the Asturian–Basque–Cantabrian system and analogue (sandbox) models, this work focuses on the linkage between basement-controlled and salt-decoupled domains and how deformation is accommodated between the two during extension and subsequent inversion. Analogue models show significant structural variability in the transitional domain, with oblique structures that can be strongly modified by syn-contractional sedimentation. Experimental results are consistent with the case study.
Junichi Fukuda, Takamoto Okudaira, and Yukiko Ohtomo
Solid Earth, 14, 409–424, https://doi.org/10.5194/se-14-409-2023, https://doi.org/10.5194/se-14-409-2023, 2023
Short summary
Short summary
We measured water distributions in deformed quartz by infrared spectroscopy mapping and used the results to discuss changes in water distribution resulting from textural development. Because of the grain size reduction process (dynamic recrystallization), water contents decrease from 40–1750 wt ppm in host grains of ~2 mm to 100–510 wt ppm in recrystallized regions composed of fine grains of ~10 µm. Our results indicate that water is released and homogenized by dynamic recrystallization.
Bastien Walter, Yves Géraud, Alexiane Favier, Nadjib Chibati, and Marc Diraison
EGUsphere, https://doi.org/10.5194/egusphere-2023-397, https://doi.org/10.5194/egusphere-2023-397, 2023
Preprint archived
Short summary
Short summary
Lake Abhe in southwestern Djibouti is known for its exposures of massive hydrothermal chimneys and hot springs on the lake’s eastern shore. This study highlights the control of the main structural faults of the area on the development of these hydrothermal features. This work contributes to better understand hydrothermal fluid pathways in this area and may help further exploration for the geothermal development of this remarkable site.
Michael Rudolf, Matthias Rosenau, and Onno Oncken
Solid Earth, 14, 311–331, https://doi.org/10.5194/se-14-311-2023, https://doi.org/10.5194/se-14-311-2023, 2023
Short summary
Short summary
Analogue models of tectonic processes rely on the reproduction of their geometry, kinematics and dynamics. An important property is fault behaviour, which is linked to the frictional characteristics of the fault gouge. This is represented by granular materials, such as quartz sand. In our study we investigate the time-dependent frictional properties of various analogue materials and highlight their impact on the suitability of these materials for analogue models focusing on fault reactivation.
Jessica Barabasch, Joyce Schmatz, Jop Klaver, Alexander Schwedt, and Janos L. Urai
Solid Earth, 14, 271–291, https://doi.org/10.5194/se-14-271-2023, https://doi.org/10.5194/se-14-271-2023, 2023
Short summary
Short summary
We analysed Zechstein salt with microscopes and observed specific microstructures that indicate much faster deformation in rock salt with fine halite grains when compared to salt with larger grains. This is important because people build large cavities in the subsurface salt for energy storage or want to deposit radioactive waste inside it. When engineers and scientists use grain-size data and equations that include this mechanism, it will help to make better predictions in geological models.
Nicolás Molnar and Susanne Buiter
Solid Earth, 14, 213–235, https://doi.org/10.5194/se-14-213-2023, https://doi.org/10.5194/se-14-213-2023, 2023
Short summary
Short summary
Progression of orogenic wedges over pre-existing extensional structures is common in nature, but deciphering the spatio-temporal evolution of deformation from the geological record remains challenging. Our laboratory experiments provide insights on how horizontal stresses are transferred across a heterogeneous crust, constrain which pre-shortening conditions can either favour or hinder the reactivatation of extensional structures, and explain what implications they have on critical taper theory.
Tania Habel, Martine Simoes, Robin Lacassin, Daniel Carrizo, and German Aguilar
Solid Earth, 14, 17–42, https://doi.org/10.5194/se-14-17-2023, https://doi.org/10.5194/se-14-17-2023, 2023
Short summary
Short summary
The Central Andes are one of the most emblematic reliefs on Earth, but their western flank remains understudied. Here we explore two rare key sites in the hostile conditions of the Atacama desert to build cross-sections, quantify crustal shortening, and discuss the timing of this deformation at ∼20–22°S. We propose that the structures of the Western Andes accommodated significant crustal shortening here, but only during the earliest stages of mountain building.
Naïm Célini, Frédéric Mouthereau, Abdeltif Lahfid, Claude Gout, and Jean-Paul Callot
Solid Earth, 14, 1–16, https://doi.org/10.5194/se-14-1-2023, https://doi.org/10.5194/se-14-1-2023, 2023
Short summary
Short summary
We investigate the peak temperature of sedimentary rocks of the SW Alps (France), using Raman spectroscopy on carbonaceous material. This method provides an estimate of the peak temperature achieved by organic-rich rocks. To determine the timing and the tectonic context of the origin of these temperatures we use 1D thermal modelling. We find that the high temperatures up to 300 °C were achieved during precollisional extensional events, not during tectonic burial in the Western Alps.
Luke N. J. Wedmore, Tess Turner, Juliet Biggs, Jack N. Williams, Henry M. Sichingabula, Christine Kabumbu, and Kawawa Banda
Solid Earth, 13, 1731–1753, https://doi.org/10.5194/se-13-1731-2022, https://doi.org/10.5194/se-13-1731-2022, 2022
Short summary
Short summary
Mapping and compiling the attributes of faults capable of hosting earthquakes are important for the next generation of seismic hazard assessment. We document 18 active faults in the Luangwa Rift, Zambia, in an active fault database. These faults are between 9 and 207 km long offset Quaternary sediments, have scarps up to ~30 m high, and are capable of hosting earthquakes from Mw 5.8 to 8.1. We associate the Molaza Fault with surface ruptures from two unattributed M 6+ 20th century earthquakes.
Michał P. Michalak, Lesław Teper, Florian Wellmann, Jerzy Żaba, Krzysztof Gaidzik, Marcin Kostur, Yuriy P. Maystrenko, and Paulina Leonowicz
Solid Earth, 13, 1697–1720, https://doi.org/10.5194/se-13-1697-2022, https://doi.org/10.5194/se-13-1697-2022, 2022
Short summary
Short summary
When characterizing geological/geophysical surfaces, various geometric attributes are calculated, such as dip angle (1D) or dip direction (2D). However, the boundaries between specific values may be subjective and without optimization significance, resulting from using default color palletes. This study proposes minimizing cosine distance among within-cluster observations to detect 3D anomalies. Our results suggest that the method holds promise for identification of megacylinders or megacones.
Erik M. Young, Christie D. Rowe, and James D. Kirkpatrick
Solid Earth, 13, 1607–1629, https://doi.org/10.5194/se-13-1607-2022, https://doi.org/10.5194/se-13-1607-2022, 2022
Short summary
Short summary
Studying how earthquakes spread deep within the faults they originate from is crucial to improving our understanding of the earthquake process. We mapped preserved ancient earthquake surfaces that are now exposed in South Africa and studied their relationship with the shape and type of rocks surrounding them. We determined that these surfaces are not random and are instead associated with specific kinds of rocks and that their shape is linked to the evolution of the faults in which they occur.
Sivaji Lahiri, Kitty L. Milliken, Peter Vrolijk, Guillaume Desbois, and Janos L. Urai
Solid Earth, 13, 1513–1539, https://doi.org/10.5194/se-13-1513-2022, https://doi.org/10.5194/se-13-1513-2022, 2022
Short summary
Short summary
Understanding the mechanism of mechanical compaction is important. Previous studies on mechanical compaction were mostly done by performing experiments. Studies on natural rocks are rare due to compositional heterogeneity of the sedimentary succession with depth. Due to remarkable similarity in composition and grain size, the Sumatra subduction complex provides a unique opportunity to study the micromechanism of mechanical compaction on natural samples.
Dongwon Lee, Nikolaos Karadimitriou, Matthias Ruf, and Holger Steeb
Solid Earth, 13, 1475–1494, https://doi.org/10.5194/se-13-1475-2022, https://doi.org/10.5194/se-13-1475-2022, 2022
Short summary
Short summary
This research article focuses on filtering and segmentation methods employed in high-resolution µXRCT studies for crystalline rocks, bearing fractures, or fracture networks, of very small aperture. Specifically, we focus on the identification of artificially induced (via quenching) fractures in Carrara marble samples. Results from the same dataset from all five different methods adopted were produced and compared with each other in terms of their output quality and time efficiency.
Alberto Ceccato, Giulia Tartaglia, Marco Antonellini, and Giulio Viola
Solid Earth, 13, 1431–1453, https://doi.org/10.5194/se-13-1431-2022, https://doi.org/10.5194/se-13-1431-2022, 2022
Short summary
Short summary
The Earth's surface is commonly characterized by the occurrence of fractures, which can be mapped, and their can be geometry quantified on digital representations of the surface at different scales of observation. Here we present a series of analytical and statistical tools, which can aid the quantification of fracture spatial distribution at different scales. In doing so, we can improve our understanding of how fracture geometry and geology affect fluid flow within the fractured Earth crust.
Giulio Viola, Giovanni Musumeci, Francesco Mazzarini, Lorenzo Tavazzani, Manuel Curzi, Espen Torgersen, Roelant van der Lelij, and Luca Aldega
Solid Earth, 13, 1327–1351, https://doi.org/10.5194/se-13-1327-2022, https://doi.org/10.5194/se-13-1327-2022, 2022
Short summary
Short summary
A structural-geochronological approach helps to unravel the Zuccale Fault's architecture. By mapping its internal structure and dating some of its fault rocks, we constrained a deformation history lasting 20 Myr starting at ca. 22 Ma. Such long activity is recorded by now tightly juxtaposed brittle structural facies, i.e. different types of fault rocks. Our results also have implications on the regional evolution of the northern Apennines, of which the Zuccale Fault is an important structure.
Wan-Lin Hu
Solid Earth, 13, 1281–1290, https://doi.org/10.5194/se-13-1281-2022, https://doi.org/10.5194/se-13-1281-2022, 2022
Short summary
Short summary
Having a seismic image is generally expected to enable us to better determine fault geometry and thus estimate geological slip rates accurately. However, the process of interpreting seismic images may introduce unintended uncertainties, which have not yet been widely discussed. Here, a case of a shear fault-bend fold in the frontal Himalaya is used to demonstrate how differences in interpretations can affect the following estimates of slip rates and dependent conclusions.
Manuel D. Menzel, Janos L. Urai, Estibalitz Ukar, Thierry Decrausaz, and Marguerite Godard
Solid Earth, 13, 1191–1218, https://doi.org/10.5194/se-13-1191-2022, https://doi.org/10.5194/se-13-1191-2022, 2022
Short summary
Short summary
Mantle rocks can bind large quantities of carbon by reaction with CO2, but this capacity requires fluid pathways not to be clogged by carbonate. We studied mantle rocks from Oman to understand the mechanisms allowing their transformation into carbonate and quartz. Using advanced imaging techniques, we show that abundant veins were essential fluid pathways driving the reaction. Our results show that tectonic stress was important for fracture opening and a key ingredient for carbon fixation.
Jean-Baptiste P. Koehl, Steffen G. Bergh, and Arthur G. Sylvester
Solid Earth, 13, 1169–1190, https://doi.org/10.5194/se-13-1169-2022, https://doi.org/10.5194/se-13-1169-2022, 2022
Short summary
Short summary
The San Andreas fault is a major active fault associated with ongoing earthquake sequences in southern California. The present study investigates the development of the Indio Hills area in the Coachella Valley along the main San Andreas fault and the Indio Hills fault. The Indio Hills area is located near an area with high ongoing earthquake activity (Brawley seismic zone), and, therefore, its recent tectonic evolution has implications for earthquake prediction.
Jin Lai, Dong Li, Yong Ai, Hongkun Liu, Deyang Cai, Kangjun Chen, Yuqiang Xie, and Guiwen Wang
Solid Earth, 13, 975–1002, https://doi.org/10.5194/se-13-975-2022, https://doi.org/10.5194/se-13-975-2022, 2022
Short summary
Short summary
(1) Structural diagenesis analysis is performed on the ultra-deep tight sandstone. (2) Fracture and intergranular pores are related to the low in situ stress magnitudes. (3) Dissolution is associated with the presence of fracture.
Hamed Fazlikhani, Wolfgang Bauer, and Harald Stollhofen
Solid Earth, 13, 393–416, https://doi.org/10.5194/se-13-393-2022, https://doi.org/10.5194/se-13-393-2022, 2022
Short summary
Short summary
Interpretation of newly acquired FRANKEN 2D seismic survey data in southeeastern Germany shows that upper Paleozoic low-grade metasedimentary rocks and possible nappe units are transported by Variscan shear zones to ca. 65 km west of the Franconian Fault System (FFS). We show that the locations of post-Variscan upper Carboniferous–Permian normal faults and associated graben and half-graben basins are controlled by the geometry of underlying Variscan shear zones.
Xiaodong Ma, Marian Hertrich, Florian Amann, Kai Bröker, Nima Gholizadeh Doonechaly, Valentin Gischig, Rebecca Hochreutener, Philipp Kästli, Hannes Krietsch, Michèle Marti, Barbara Nägeli, Morteza Nejati, Anne Obermann, Katrin Plenkers, Antonio P. Rinaldi, Alexis Shakas, Linus Villiger, Quinn Wenning, Alba Zappone, Falko Bethmann, Raymi Castilla, Francisco Seberto, Peter Meier, Thomas Driesner, Simon Loew, Hansruedi Maurer, Martin O. Saar, Stefan Wiemer, and Domenico Giardini
Solid Earth, 13, 301–322, https://doi.org/10.5194/se-13-301-2022, https://doi.org/10.5194/se-13-301-2022, 2022
Short summary
Short summary
Questions on issues such as anthropogenic earthquakes and deep geothermal energy developments require a better understanding of the fractured rock. Experiments conducted at reduced scales but with higher-resolution observations can shed some light. To this end, the BedrettoLab was recently established in an existing tunnel in Ticino, Switzerland, with preliminary efforts to characterize realistic rock mass behavior at the hectometer scale.
Berit Schwichtenberg, Florian Fusseis, Ian B. Butler, and Edward Andò
Solid Earth, 13, 41–64, https://doi.org/10.5194/se-13-41-2022, https://doi.org/10.5194/se-13-41-2022, 2022
Short summary
Short summary
Hydraulic rock properties such as porosity and permeability are relevant factors that have an impact on groundwater resources, geological repositories and fossil fuel reservoirs. We investigate the influence of chemical compaction upon the porosity evolution in salt–biotite mixtures and related transport length scales by conducting laboratory experiments in combination with 4-D analysis. Our observations invite a renewed discussion of the effect of sheet silicates on chemical compaction.
David Healy and Stephen Paul Hicks
Solid Earth, 13, 15–39, https://doi.org/10.5194/se-13-15-2022, https://doi.org/10.5194/se-13-15-2022, 2022
Short summary
Short summary
The energy transition requires operations in faulted rocks. To manage the technical challenges and public concern over possible induced earthquakes, we need to quantify the risks. We calculate the probability of fault slip based on uncertain inputs, stresses, fluid pressures, and the mechanical properties of rocks in fault zones. Our examples highlight the specific gaps in our knowledge. Citizen science projects could produce useful data and include the public in the discussions about hazards.
Manuel I. de Paz-Álvarez, Thomas G. Blenkinsop, David M. Buchs, George E. Gibbons, and Lesley Cherns
Solid Earth, 13, 1–14, https://doi.org/10.5194/se-13-1-2022, https://doi.org/10.5194/se-13-1-2022, 2022
Short summary
Short summary
We describe a virtual geological mapping course implemented in response to travelling and social restrictions derived from the ongoing COVID-19 pandemic. The course was designed to replicate a physical mapping exercise as closely as possible with the aid of real field data and photographs collected by the authors during previous years in the Cantabrian Zone (NW Spain). The course is delivered through Google Earth via a KMZ file with outcrop descriptions and links to GitHub-hosted photographs.
Yueyang Xia, Jacob Geersen, Dirk Klaeschen, Bo Ma, Dietrich Lange, Michael Riedel, Michael Schnabel, and Heidrun Kopp
Solid Earth, 12, 2467–2477, https://doi.org/10.5194/se-12-2467-2021, https://doi.org/10.5194/se-12-2467-2021, 2021
Short summary
Short summary
The 2 June 1994 Java tsunami earthquake ruptured in a seismically quiet subduction zone and generated a larger-than-expected tsunami. Here, we re-process a seismic line across the rupture area. We show that a subducting seamount is located up-dip of the mainshock in a region that did not rupture during the earthquake. Seamount subduction modulates the topography of the marine forearc and acts as a seismic barrier in the 1994 earthquake rupture.
Steffen Abe and Hagen Deckert
Solid Earth, 12, 2407–2424, https://doi.org/10.5194/se-12-2407-2021, https://doi.org/10.5194/se-12-2407-2021, 2021
Short summary
Short summary
We use numerical simulations and laboratory experiments on rock samples to investigate how stress conditions influence the geometry and roughness of fracture surfaces. The roughness of the surfaces was analyzed in terms of absolute roughness and scaling properties. The results show that the surfaces are self-affine but with different scaling properties between the numerical models and the real rock samples. Results suggest that stress conditions have little influence on the surface roughness.
Cited articles
Agar, S. M., Prior, D. J., and Behrmann, J. H.: Back-scattered electron imagery of the tectonic fabrics of some fine-grained sediments: Implications for fabric nomenclature and deformation processes, Geology 17, 901–904, https://doi.org/10.1130/0091-7613(1989)017< 0901, 1989.
Amann, F. and Vogelhuber, M.: Expert Report – Assessment of Geomechanical Properties of Intact Opalinus Clay, 2015.
Arch, J. and Maltman, A.: Anisotropic permeability and tortuosity in deformed wet sediments, J. Geophys. Res.-Earth, 95, 9035–9045, https://doi.org/10.1029/JB095iB06p09035, 1990.
Bettelli, G. and Vannucchi, P.: Structural stlyle of the offscraped Ligurian oceanic sequences of the Northern Apennines: New hypothesis concening the development concerning the development of melange block-in-matrix fabric, J. Struct. Geol., 25, 371–388, https://doi.org/10.1016/S0191-8141(02)00026-3, 2003.
Bonnet, E., Bour, O., Odling, N. E., Davy, P., Main, I., Cowie, P., and Berkowitz, B.: Scaling of fracture systems in geological media, Rev. Geophys., 39, 347–383, https://doi.org/10.1029/1999RG000074, 2001.
Bossart, P. and Wermeille, S.: Paleohydrological Study on the Surroundings of the Mont Terri Rock Laboratory, in: Mont Terri Project – Geology, Paleohydrology and Stress Field of the Mont Terri Region, Geology Series, edited by: Heitzmann, P. and Tripet, J.-P., Federal Office for Water and Geology, Bern-Ittigen, 45–64, 2003.
Bosworth, W. and Vollmer, F. W.: Structures of the medial Ordovician flysch of eastern New York: deformation of synorogenic deposits in an overthrust environment, 89, J. Geol., 551–568, 1981.
Brittain, H. G.: Particle-Size Distribution II: Powdered Solids of sampling powdered solids, Pharm. Phys., 2, 1–5, 2002.
Carreras, J., Czeck, D. M., Druguet, E., and Hudleston, P. J.: Structure and development of an anastomosing network of ductile shear zones, J. Struct. Geol. 32, 656–666, https://doi.org/10.1016/j.jsg.2010.03.013, 2010.
Casciello, E., Cesarano, M., and Cosgrove, J. W.: Shear deformation of pelitic rocks in a large-scale natural fault, Geol. Soc. Spec. Publ. 224, 113–125., https://doi.org/10.1144/GSL.SP.2004.224.01.08, 2004.
Chester, F. M., Rowe, C., Ujiie, K., Kirkpatrick, J., Regalla, C., Remitti, F., Moore, J. C., Toy, V., Wolfson-Schwehr, M., Bose, S., Kameda, J., Mori, J. J., Brodsky, E. E., Eguchi, N., and Toczko, S.: Structure and composition of the plate-boundary slip zone for the 2011 Tohoku-Oki earthquake, Science, 342, 1208–1211, https://doi.org/10.1126/science.1243719, 2013.
Clauer, N., Techer, I., Nussbaum, C., and Laurich, B.: Geochemical signatures of paleofluids in calcite from microstructures and matrix of the Main Fault in the Opalinus Clay: A contribution to the regional evolutionary model, Swiss J. Geosci., accepted, 2017.
Coli, M. and Sani, F.: Vein distribution in a thrust zone; a case history from the Northern Apennines, Italy Deformation mechanisms, rheology and tectonics, Geol. Soc. Spec. Publ., 54, 475–482, https://doi.org/10.1144/GSL.SP.1990.054.01.43, 1990.
Cowan, D., Moore, J., Roeske, S. M., Lundberg, N., and Lucas, S. E.: Structural features at the deformation front of the Barbados Ridge Complex, Deep Sea Drilling Project LEG 78A, Initial Reports Deep Sea Drill, 78 535–548, https://doi.org/10.2973/dsdp.proc.78a.127.1984, 1984.
Cuss, R. J., Milodowski, A., and Harrington, J. F.: Fracture transmissivity as a function of normal and shear stress: First results in Opalinus Clay, Phys. Chem. Earth, 36, 1960–1971, https://doi.org/10.1016/j.pce.2011.07.080, 2011.
Cuss, R. J., Harrington, J. F., Graham, C. C., Sathar, S., and Milodowski, A. E.: Observations of heterogeneous pore pressure distributions in clay-rich materials, Mineral. Mag., 76, 3115–3129, https://doi.org/10.1180/minmag.2012.076.8.26, 2012.
Dehandschutter, B., Vandycke, S., Sintubin, M., Vandenberghe, N., and Wouters, L.: Brittle fractures and ductile shear bands in argillaceous sediments: Inferences from Oligocene Boom Clay (Belgium), J. Struct. Geol., 27, 1095–1112, https://doi.org/10.1016/j.jsg.2004.08.014, 2005.
Desbois, G., Urai, J. L., and Kukla, P. A.: Morphology of the pore space in claystones – evidence from BIB/FIB ion beam sectioning and cryo-SEM observations, eEarth Discuss., 4, 1–19, https://doi.org/10.5194/eed-4-1-2009, 2009.
Haines, S. H., Kaproth, B., Marone, C., Saffer, D., and Van der Pluijm, B.: Shear zones in clay-rich fault gouge: A laboratory study of fabric development and evolution, J. Struct. Geol., 51, 206–225, https://doi.org/10.1016/j.jsg.2013.01.002, 2013.
Hemes, S., Desbois, G., Urai, J. L., Craen, M. De, and Honty, M.: Variations in the morphology of porosity in the Boom Clay Formation: insights from 2-D high resolution BIB-SEM imaging and Mercury injection Porosimetry, Netherlands, J. Geosci., 92, 275–300, 2013.
Houben, M. E.: In situ characterization of the microstructure and porosity of Opalinus Clay (Mont Terri Rock Laboratory, Switzerland), 2013.
Houben, M. E., Desbois, G., and Urai, J. L.: Pore morphology and distribution in the Shaly facies of Opalinus Clay (Mont Terri, Switzerland): Insights from representative 2-D BIB–SEM investigations on mm to nm scale, Appl. Clay Sci., 71, 82–97, https://doi.org/10.1016/j.clay.2012.11.006, 2013.
Housen, B. A., Tobin, H. J., Labaume, P., Leitch, E. C., and Maltman, A. J.: Strain decoupling across the decollement of the Barbados accretionary prism, Geology, 24, 127–130, 1996.
Ikari, M., Kameda, J., and Kopf, A.: Frictional behavior of the plate boundary décollement zone in the Japan Trench, sampled during the Japan Trench Fast Drilling Project (JFAST): Implications for shallow coseismic slip propagation, in: EGU General Assembly Conference Abstracts, 2013.
Ikari, M. J., Marone, C., and Saffer, D. M.: On the relation between fault strength and frictional stability, Geology, 39, 83–86, https://doi.org/10.1130/G31416.1, 2011.
Ingram, G. M. and Urai, J. L.: Top-seal leakage through faults and fractures: the role of mudrock properties, Geol. Soc. Spec. Publ., 158, 125–135, https://doi.org/10.1144/GSL.SP.1999.158.01.10, 1999.
Ismat, Z.: Block-supported cataclastic flow within the upper crust, J. Struct. Geol., 56, 118–128, https://doi.org/10.1016/j.jsg.2013.08.010, 2013.
Kirkpatrick, J. D., Rowe, C. D., Ujiie, K., Moore, J. C., Regalla, C., Remitti, F., Toy, V., Wolfson-Schwehr, M., Kameda, J., Bose, S., and Chester, F. M.: Structure and lithology of the Japan Trench subduction plate boundary fault, Tectonics, 34, 53–69, https://doi.org/10.1002/2014TC003695, 2015.
Klaver, J., Desbois, G., Urai, J. L., and Littke, R.: BIB-SEM study of the pore space morphology in early mature Posidonia Shale from the Hils area, Germany, Int. J. Coal. Geol. 103, 12–25, https://doi.org/10.1016/j.coal.2012.06.012, 2012.
Labaume, P., Maltman, A. J., Bolton, A., Tessier, D., Ogawa, Y., and Takizawas, S.: Scaly fabrics in sheard clays from the decollement zone of the Barbados accretionary prism, in: Proceedings of the Ocean Drilling Program, edited by: Shipley, T. R., Ogawa, Y., Blum, P., and Bahr, J. M., 59–77, 1997.
Laurich, B.: Evolution of microstructure and porosity in faulted Opalinus Clay, RWTH-Aachen University, 2015.
Laurich, B., Urai, J. L., Desbois, G., Vollmer, C., and Nussbaum, C.: Microstructural evolution of an incipient fault zone in Opalinus Clay: Insights from an optical and electron microscopic study of ion-beam polished samples from the Main Fault in the Mt-Terri underground research laboratory, J. Struct. Geol., 67, 107–128, https://doi.org/10.1016/j.jsg.2014.07.014, 2014.
Maltman, A. J.: Shear zones in argillaceous sediments–an experimental study, Geol. Soc. Spec. Publ., 29, 77–87, https://doi.org/10.1144/GSL.SP.1987.029.01.08, 1987.
Maltman, A., Labaume, P., and Housen, B.: Structural geology of the décollement at the toe of the Barbados accretionary prism, Proc. Ocean Drill. Program. Sci. Results, 156, 279–292, 1997.
Mazurek, M., Alt-Epping, P., Bath, A., Gimmi, T., Waber, H. N., Buschaert, S., Cannière, P. De, Craen, M. De, Gautschi, A., Savoye, S., Vinsot, A., Wemaere, I., and Wouters, L.: Natural tracer profiles across argillaceous formations, Appl. Geochem., 26, 1035–1064, https://doi.org/10.1016/j.apgeochem.2011.03.124, 2011.
Mazurek, M., Hurford, A. J., and Leu, W.: Unravelling the multi-stage burial history of the Swiss Molasse Basin: integration of apatite fission track, vitrinite reflectance and biomarker isomerisation analysis, Basin Res., 18, 27–50, https://doi.org/10.1111/j.1365-2117.2006.00286.x, 2006.
McGrath, A. G. and Davison, I.: Damage zone geometry around fault tips, J. Struct. Geol., 17, 1011–1024, https://doi.org/10.1016/0191-8141(94)00116-H, 1995.
Moore, J. C., Roeske, S., Cowan, D. S., Lundberg, N., Gonzales, E., Schoonmaker, J., and Lucas, S. E.: Scaly fabrics from Deep Sea Drilling Project cores from forearcs, Geol. Soc. Am. Mem., 166, 55–74, https://doi.org/10.1130/MEM166-p55, 1986.
Moore, P. L. and Iverson, N. R.: Slow episodic shear of granular materials regulated by dilatant strengthening, Geology, 30, 843, https://doi.org/10.1130/0091-7613(2002)030< 0843:SESOGM> 2.0.CO;2, 2002.
Morgan, J. K. and Karig, D. E.: Décollement processes at the Nankai accretionary margin, southeast Japan: Propagation, deformation, and dewatering, J. Geophys. Res., 100, 15221, https://doi.org/10.1029/95JB00675, 1995.
Nicol, A., Gillespie, P. A., Childs, C., and Walsh, J. J.: Relay zones between mesoscopic thrust faults in layered sedimentary sequences, J. Struct. Geol., 24, 709–727, https://doi.org/10.1016/S0191-8141(01)00113-4, 2002.
Nussbaum, C., Bossart, P., Amann, F., and Aubourg, C.: Analysis of tectonic structures and excavation induced fractures in the Opalinus Clay, Mont Terri underground rock laboratory (Switzerland), Swiss J. Geosci. 104, 187–210, https://doi.org/10.1007/s00015-011-0070-4, 2011.
Nussbaum, C., Kloppenburg, A., Caer, T., and Bossart, P.: Tectonic evolution of the Mont Terri region, northwestern Swiss Jura: constraints from kinematic forward modelling, Swiss, J. Geosci., accepted, 2017.
Passchier, C. W. and Trouw, R. A. J.: Microtectonics, 2nd Edn., Springer-Verlag, Berlin/Heidelberg, https://doi.org/10.1007/3-540-29359-0, 2005.
Pearson, F. J., Arcos, D., Bath, A., Boisson, J., Fernandez, A. M., Gäbler, H., Gaucher, E., Gautschi, A., and Griffault, L.: Mont Terri Project: Geochemistry of Water in the Opalinus Clay Formation at the Mont Terri Rock Laboratory, 5th Edn., Federal Office for Water and Geology, Bern-Ittigen, 2003.
Prior, D. J. and Behrmann, J. H.: Thrust-related mudstone fabrics from the Barbados Forearc: A backscattered scanning electron microscope study, J. Geophys. Res., 95, 9055, https://doi.org/10.1029/JB095iB06p09055, 1990.
Reks, I. J. and Gray, D. R.: Pencil structure and strain in weakly deformed mudstone and siltstone, J. Struct. Geol., 4, 161–176, https://doi.org/10.1016/0191-8141(82)90025-6, 1982.
Rübel, A. P., Sonntag, C., Lippmann, J., Pearson, F. J., and Gautschi, A.: Solute transport in formations of very low permeability: Profiles of stable isotope and dissolved noble gas contents of pore water in the Opalinus Clay, Mont Terri, Switzerland, Geochim. Cosmochim. Ac., 66, 1311–1321, https://doi.org/10.1016/S0016-7037(01)00859-6, 2002.
Rutter, E. H., Holdsworth, R. E., and Knipe, R. J.: The nature and tectonic significance of fault-zone weakening: an introduction, Geol. Soc. Spec. Publ., 186, 1–11, https://doi.org/10.1144/GSL.SP.2001.186.01.01, 2001.
Sammis, C. G. and King, G. C. P.: Mechanical origin of power law scaling in fault zone rock, Geophys. Res. Lett., 34, 2–5, https://doi.org/10.1029/2006GL028548, 2007.
Takizawa, S. and Ogawa, Y.: Dilatant clayey microstructure in the Barbados décollement zone, J. Struct. Geol. 21, 117–122, 1999.
Taylor, E., Burkett, P. J., Wackier, J. D., and Leonard, J. N.: Physical Properties and Microstructural Response of Sediments to Accretion-Subduction: Barbados Forearc, in: Microstructure of Fine-Grained Sediments, edited by: Bennett, R. H., Bryant, W. R., and Hulbert, M. H., Springer-Verlag, New York, 213–228, 1990.
Thury, M. and Bossart, P.: The Mont Terri rock laboratory, a new international research project in a Mesozoic shale formation, in Switzerland, Eng. Geol., 52, 347–359, https://doi.org/10.1016/S0013-7952(99)00015-0, 1999.
Ujiie, K., Tanaka, H., Saito, T., Tsutsumi, A., Mori, J. J., Kameda, J., Brodsky, E. E., Chester, F. M., Eguchi, N., and Toczko, S.: Low coseismic shear stress on the Tohoku-Oki megathrust determined from laboratory experiments, Science, 342, 1211–1214, https://doi.org/10.1126/science.1243485, 2013.
van der Zee, W.: Dynamics of fault gouge development in layered sand-clay sequences, RWTH Aachen, 2001.
Vannucchi, P. and Maltman, A. J.: Insights into shallow-level processes of mountain building from the Northern Apennines, Italy, J. Geol. Soc. London, 157, 105–120, https://doi.org/10.1144/jgs.157.1.105, 2000.
Vannucchi, P., Maltman, A., Bettelli, G., and Clennell, B.: On the nature of scaly fabric and scaly clay, J. Struct. Geol., 25, 673–688, https://doi.org/10.1016/S0191-8141(02)00066-4, 2003.
Vitone, C., Viggiani, G., Cotecchia, F., and Hall, S. A.: Localized deformation in intensely fissured clays studied by 2-D digital image correlation, Acta Geotech., 8, 247–263, https://doi.org/10.1007/s11440-013-0208-9, 2013.
Vollmer, F. W. and Bosworth, W.: Formation of melange in a foreland basin overthrust setting; example from the Taconic Orogen, Melanges, their nature, Orig. significance, https://doi.org/10.1130/SPE198-p53, 1984.
Wallace, G., Moore, J. C., and Dileonardo, C. G.: Controls on localization and densi cation of a modern de'collement: Northern Barbados accretionary prism, America (NY), 288–297, 2003.
Short summary
Scaly clay is a well-known rock fabric that can develop in tectonic systems and that can alter the physical rock properties of a formation. However, the internal microstructure and evolution of this fabric remain poorly understood. We examined the scaly microstructure of progressively faulted Opalinus Clay using optical as well as scanning electron microscopy. We show that as little as 1 vol.% in scaly clay aggregates is strained and present an evolutionary model for this.
Scaly clay is a well-known rock fabric that can develop in tectonic systems and that can alter...
